Mitsubishi MOTORS Outlander 2019 Owner's Manual page 141

Type 2
When the headlights of the vehicles behind
you are very bright, the reflection factor of
the rearview mirror is automatically changed
to reduce the glare.
Normally, use the automatic mode. When the
ignition switch is turned to the "ON" position
or the operation mode is put in ON, the
reflection factor of the mirror is automatically
changed.
NOTE
 Do not hang items on, or spray glass cleaner
on the sensor (1), as reduced sensitivity
could result.
Inside rearview mirror
Type 3
When the headlights of the vehicles behind
you are very bright, the reflection factor of
the rearview mirror is automatically changed
to reduce the glare.
Normally, use the automatic mode. When the
ignition switch is turned to the "ON" position
or the operation mode is put in ON, the green
indicator (1) illuminates and the reflection
factor of the mirror is automatically changed.
Features and controls
5
5-59