Table of contents Overview Quick index General information Seat and restraint systems Features and controls Driving safety Comfort controls For emergencies Vehicle care and maintenance Customer assistance/ Reporting Safety Defects Specifications Alphabetical index...
Instruments and controls Instruments and controls N00100202788 Combination headlights and dimmer switch P.5-207 Sportronic steering wheel paddle Automatic high beam system switch Multi information display Active stability control shifter (if so equipped) (if so equipped) P.5-211 switch (if so equipped) (ASC) OFF switch P.5-101 P.5-72, 5-80 Turn signal lever P.5-217...
Page 4
Instruments and controls Hazard warning flasher switch P.5-218 Audio (if so equipped) Passenger’s airbag off indicator P.4-40 [Refer to the separate owner’s manual.] Multi Around Monitor (if so equipped) P.5-144 Front passenger seat belt warning light P.4-23 Camera switch (if so equipped) P.5-148 Air conditioner P.7-5 Passenger’s vents...
Instruments and controls Supplemental restraint system (SRS) - airbag (for front passenger’s seat) P. 4-35, 4-42 Glove compartment P.5-239 Card holder P.5-239 Parking brake lever type Electric parking brake type Parking brake lever P.5-53 Electric parking brake switch P.5-54 Heated seat switch (if so equipped) P.4-8 Brake auto hold...
Page 6
Interior Interior N00100302473 Electric remote-controlled outside rearview mirrors switch P.5-61 Sun visors P.5-229 Vanity mirror P.5-229 Lock switch P.5-50 Card holder P.5-229 Power door lock switch P.5-36 Power window switch Adjustable seat belt shoulder anchor P.4-24 P.5-49 Seat belts P.4-18 Dome light (rear) P.5-237 Inside rearview mirror P.5-57 Cargo room light...
Page 7
Interior Dome light (front)/Reading Downlight lights P.5-236 P.5-207 Supplemental restraint system (SRS) - curtain Bottle holder P.5-243 airbags P.4-35, 4-47 Sunroof switch Hands-free microphone (if so equipped) P.5-51 (if so equipped) Assist grips P.5-246 Coat hook P.5-246 Cargo area cover (if so equipped) P.5-244 Head restraints P.4-11 Arm rest P.4-10...
Luggage area Luggage area N00100501579 Jack P. 8-5 Tools P.8-5 Tether anchorages for child restraint system P.4-30 Luggage hooks P.5-246 12 V power outlet P.5-230 Luggage floor box P.5-240 Overview...
Page 9
Outside (Front) Outside (Front) N00100602782 Sensor (if so equipped) [for Forward Collision Mitigation System Sunroof (if so equipped) P.5-51 (FCM), Lane Departure Warning System (LDW) and Automatic Power window P.5-49 high beam system] P. 5-118, 5-134, 5-211 Rain sensor (if so equipped) P.5-219 Fuel tank filler P.3-3 Outside rearview mirrors P.5-60 Windshield wipers P.5-219...
Page 10
Outside (Rear) Outside (Rear) N00100602737 Keyless entry system (if so equipped) P.5-7, 5-30 F.A.S.T.-key (Free-hand Advanced Security Transmitter) (if so equipped) Antenna P.5-13 Locking and unlocking P.5-34 High-mounted stop light Tail lights P.5-207, 9-32, 9-37 Tires P.9-15 P.9-32 Tire pressure monitoring system P.5-137 Tire inflation pressures P.9-19 Liftgate (if so equipped) P.5-38...
If the light comes on while the engine oil level is normal, have the system checked P. 5-205 at an authorized Mitsubishi Motors dealer or a repair facility of your choice as soon Oil pressure warning light as possible.
Page 13
If the warning light comes on during driving, there is the possibility that the parking brake cannot be operated or released. Immediately stop the vehicle in a safe place, P. 5-203 and contact an authorized Mitsubishi Motors dealer or a repair facility of your choice for assistance. Electric parking brake warning light (yellow) (if so equipped) ...
Page 14
If the light does not go out after the test, or if it comes on again, we recommend that Anti-lock braking system warning you have the system checked at an authorized Mitsubishi Motors dealer or a repair light facility of your choice as soon as possible.
Page 15
Restart the engine and check whether the indicator goes out. If the indicator does not go out, or if it comes on again, have your vehicle inspected by an authorized Mitsubishi Motors dealer or a repair facility of your choice as soon P. 5-102 as possible.
Page 16
If this problem occurs... If this problem occurs... N00200901936 Problem Do this Ref. Page Unable to turn the key. Will not turn from “LOCK” to “ACC”. (Vehicles with steering lock system) P. 5-65 (except for vehicles equipped Turn the key while turning the steering wheel in either direction. with the F.A.S.T.-key) Will not turn from “ACC”...
Page 17
If this problem occurs... Problem Do this Ref. Page Cannot shift the selector lever Shift the selector lever while pressing the brake pedal. P. 5-68 from the “P” (PARK) position. Check that the ignition switch or the operation mode is in ON. The windows are fogged up.
Page 18
If this problem occurs... Problem Do this Ref. Page The information screen in the multi information display will be interrupted and the engine coolant temperature warning display will appear. Also “ ” will blink. (Type 1: Color liquid crystal display type) The high coolant temperature warning light will illuminate.
Page 19
The initial movement of the There may be a problem in the automatic transaxle. vehicle is slow when the vehicle Have the system inspected by your authorized Mitsubishi Motors dealer or a repair facility of P. 5-74 starts moving.
Page 20
P. 5-81 type) will not turn off, or if they come on frequently, please have the vehicle checked at your is slow when the vehicle starts nearest Mitsubishi Motors dealer. moving. (for vehicles with CVT) A tire is punctured.
General information Fuel selection ...................3-2 Filling the fuel tank ................3-3 Modifications to and racing of your vehicle ........3-5 Genuine Mitsubishi Motors parts ............3-7 California Perchlorate Materials Requirements .......3-7...
Fuel selection oline to minimize fuel-injector clogging and the oxygenates may not be identified by those Fuel selection minimize intake-valve deposits. Detergent names. Oxygenates are required in some gasoline helps keep your engine in tune and areas of the country. Oxygenated fuel can be N00301001951 Your vehicle is designed to use unleaded gas- your emission-control system working prop-...
Mitsubishi Motors dealer or a When handling fuel, comply with the Mitsubishi Motors dealer or a repair facility repair facility of your choice for assistance. safety regulations displayed by garages of your choice.
Page 25
Filling the fuel tank 3. Open the fuel tank filler pipe by slowly WARNING Refueling turning the fuel tank filler cap counter- Before removing the fuel tank filler cap, clockwise. 1. Before filling with fuel, stop the engine. be sure to get rid of your body’s static 2.
The indicator will go off after several driving cycles. If the indicator does not go off, con- 6. To re-install, turn the fuel tank filler pipe tact your authorized Mitsubishi Motors cap slowly clockwise until you hear click- dealer or a repair facility of your choice as ing sounds, then gently push the fuel tank soon as possible.
Page 27
While driving, do not use a cellular phone inspections and service to this connector in a way that hinders safe driving. Any- Failure to use Mitsubishi Motors genuine because an unexpected problem could result. thing, including cellular phone usage, that...
Genuine Mitsubishi Motors parts vehicle has a selection of Mitsubishi Motors Modification/alterations to the authorized accessories to choose from to tai- electrical or fuel systems lor your new vehicle to your own personal preference. Your Mitsubishi Motors dealer’s N00301800141 Parts Manager has information on various...
Seat and restraint systems Seats ....................4-2 Seat arrangement ................4-3 Seats and restraint systems ..............4-4 Front seats ..................4-4 Second row seats ................4-8 Third row seat (Seating 7 passengers) ...........4-10 Head restraints ................4-11 Making a cargo area ...............4-13 Making a flat seat ................4-16 Seat belts ..................4-18 Seat belt use during pregnancy ............4-25 Seat belt pre-tensioner and force limiter systems ......4-25...
Seats Seats N00408401607 To adjust the seatback Page 4-8 1 - Front seat Arm rest Page 4-10 Accessing the third row seat (Seating 7 To adjust the seat forward or backward passengers) Page 4-10 ...
Seat arrangement Seat arrangement N00401701122 You may arrange your seats in the following positions. Seating 5 passengers Seating 7 passengers Ordinary use Flat seatPage 4-16 Folding the second row seats Page 4-13 Making a cargo area Folding the third row —...
Seats and restraint systems WARNING WARNING Seats and restraint systems Do not place objects under the seats. This After adjusting the seat, make sure that it N00401601251 could prevent the seat from locking is securely locked into position. Your vehicle has seat belts and other safety securely, and it could lead to an accident.
Page 34
Front seats CAUTION To adjust the seat forward or Power seat adjustment backward When sliding or reclining the seat rearward, pay careful attention to the second row seat Operate the switch forward or backward to N00401901326 passengers. move the seat to the desired position. Release ...
Page 35
Front seats To adjust the seatbacks Power seat adjustment WARNING To reduce the risk of serious injury or N00402001379 death in the event of an accident or sud- Operate the switch in the direction of the Manual seat adjustment den stop, all seatbacks should be kept in arrows to adjust the seatback.
Page 36
Front seats 1- Raise 1- Raise or lower the front end of the seat 3- Raise or lower the entire seat 2- Lower Power seat adjustment Operate the switch in the direction of the arrows to raise or lower the seat. NOTE ...
Second row seats 3 (LO) - Heater low (to keep the seat Heated seat (if so equipped) CAUTION warm) When cleaning the seat, do not use benzine, N00435601463 The heated seats can be operated by pushing kerosene, gasoline, alcohol, or other organic WARNING the switch when the ignition switch or the solvents;...
Page 38
Second row seats To adjust the seatbacks WARNING Seat belt performance during an accident can be adversely affected if the seatbacks Pull the lever up and adjust the seatback by are reclined. The more a seatback is hand to the desired position, and release the reclined, the more likely seat belt perfor- lever.
Third row seat (Seating 7 passengers) To return the seat, slide the entire seat back- Arm rest Third row seat (Seating 7 ward to the desired position and then raise the passengers) N00403001318 seatback until it locks securely. To use the armrest, tilt the arm rest down for After returning the seat, gently try to move it N00419501073 use as shown.
Head restraints WARNING WARNING Head restraints Driving without the head restraints in When a person sits in the second center N00404301594 place can cause you and your passengers seating position, pull up the head restraint Head restraints can reduce the risk of a whip- serious injury or death in an accident.
Page 41
Head restraints pressing the lock knob (A) until the restraint Adjustment of the head To remove locks into place. restraint height (front seats) Press the lock knob (A) in the direction CAUTION shown by the arrows. Then pull the head To reduce the risk of injury in an accident, restraint up and out of the seatback.
Making a cargo area WARNING NOTE When driving the vehicle, do not allow You can separately fold the right and left side anyone to sit on the third row seat if the of the second row seat. second row seat is in the folded position. To fold the second row seat CAUTION 1.
Page 43
Making a cargo area 4. On vehicles with the second row seat slide 6. Fold forward the seat belt buckle. CAUTION function, move the second row seat fully Do not allow any person to sit on the flipped backward. seat cushion, and do not place luggage on it.
Page 44
Making a cargo area To return NOTE WARNING A rubber strap (C) is attached to the seat belt Ensure that the head restraints are 1. Raise the seatback until it locks securely buckle for the left outboard seating position. returned to their original positions before into place.
Making a flat seat Folding the third row seats Making a flat seat (Seating 7 passengers) N00404801166 The entire interior of the vehicle may be used N00409800021 for sleeping accommodations by removing To fold the head restraints and fully reclining all the seats when the vehicle is stopped.
Page 46
Making a flat seat CAUTION To raise the seatback of the front seat, firmly place your hand on the seatback, pull the seatback lock knob up, and raise the seatback slowly. (Refer to “To adjust the seatback” on page 4-6.) Do not let children adjust the seat- back.
Mitsubishi Motors far back as possible. Refer to “Supplemen- dealer to determine whether replacement tal Restraint System (SRS) - airbag” on is necessary.
Page 48
Seat belts 1. Occupants should always sit back in their Seat belt instructions WARNING seats with their backs against the upright To reduce the risk of serious injury or N00406201513 seatback. To reduce the risk of serious death in the event of an accident or sud- All seats are equipped with a seat belt which injury or death during deployment of the den stop, all seatbacks should be kept in...
Page 49
Seat belts 3. Grasp the latch plate and slide it up the NOTE NOTE webbing so that it easily pulls across your If the seat belt locks up and cannot be pulled With the exception of the seat belt for the body.
Page 50
Seat belts 6. To release the belt, press the button on the Detachable center seat belt for To attach buckle and allow the belt to retract. second row If the belt does not retract smoothly, pull it 1. Pull out the detachable anchor plate (C) out and check for kinks or twists in the N00409900035 from the storage pocket on seat back...
Page 51
Seat belts 3. Pull the small latch plate (A) slowly and 3. After the seat belt has retracted com- To detach insert it into the detachable anchor plate pletely, insert the latch plate (B) into the until a click is heard. Make sure that the upper slit (F), and then insert the small 1.
Page 52
Seat belts warning light will come on and a tone will Driver’s seat belt Front passenger seat belt warn- sound for approximately 6 seconds to remind reminder/warning light and ing light you to fasten your seat belt. display If the vehicle is driven with the seat belt still N00418301247 unfastened, the warning light will blink and The front passenger seat belt warning light is...
Page 53
Seat belts WARNING WARNING Storing the second row (out- board seating positions) and When a child booster seat is used on the Always adjust the shoulder belt anchor so front passenger seat, the front passenger that the shoulder belt is positioned across third row seat belts seat belt warning light will not come on, if the center of your shoulder without touch-...
Seat belt use during pregnancy Put the seat belt webbing in the back slot (A) Seat belt extender Seat belt use during preg- on the clip and insert the metal plate of the nancy N00406701202 latch plate into the front slot (B) as shown in If your seat belt is not long enough, even the illustration.
Page 55
The ignition switch is in the “ON” or belt pre-tensioner system inspected by an “START” position. authorized Mitsubishi Motors dealer. [Vehicles equipped with the F.A.S.T.-key] The seat belt pre-tensioner system includes The operation mode is in ON.
Child restraint systems The child restraint system should be appropri- Children who weigh more than 40 pounds SRS warning ate for your child’s weight and height, and (18 kg) or who are more than 40 inches N00408701147 should properly fit your vehicle’s seat. (100 cm) tall, regardless of age, should This warning light tells you if there is a prob- For detailed information, refer to the instruc-...
Page 57
Child restraint systems WARNING WARNING WARNING Any child who is too large to use a child Never hold an infant or child in your arms Your vehicle is also equipped with a front restraint system should ride in the rear or on your lap when riding in this vehicle, passenger’s airbag.
Page 58
Child restraint systems WARNING WARNING NOTE FRONT-FACING CHILD RESTRAINT When installing a child restraint system, Before purchasing a child restraint system, SYSTEMS should be used in the rear seat follow the instructions provided by the try installing it in the rear seat to ensure whenever possible.
Page 59
Child restraint systems Installing a child restraint sys- Tether anchor locations Examples of child restraint sys- tems compatible with the LATCH tem using the LATCH (Lower N00418901201 Your vehicle has 3 attachment points on the system Anchors and Tethers for chil- backside of the second row seats.
Page 60
Child restraint systems 3. For easier access, the seatback may be 4. Latch the tether strap hook (E) of the child D- Connector recline rearward. restraint system to the tether anchor bar Push the anchor connectors (D) on the (F) and tighten the tether strap so it is NOTE child restraint system into the lower securely fastened.
Page 61
Child restraint systems installation function. Always use the ALR WARNING WARNING child restraint installation function when you When using a child restraint in a rear When using a child restraint in a rear install a child restraint system using the seat seating position, always...
Page 62
Child restraint systems 2. Route the seat belt through the child 3. To activate the ALR child restraint instal- 5. After confirming that the belt is locked, restraint system according to the instruc- lation function, slowly pull the shoulder grab the shoulder part of the belt near the tions provided by the child restraint sys- part of the belt all the way out of the buckle and pull up to remove any slack...
Maintenance and inspection of seat belts 6. Latch the tether strap hook (A) of the 7. Before putting your child in the restraint, Systems and Booster Seats Safety Regula- child restraint system to the tether anchor push and pull the restraint in all directions tions.
Mitsubishi Motors dealer. Failure to have The SRS airbags are NOT a substitute for use an authorized Mitsubishi Motors dealer head and chest injuries in certain moderate to of the seat belts. For maximum protection in perform the work could reduce the effec- severe frontal collisions.
Page 65
Supplemental Restraint System (SRS) - airbag WARNING WARNING WARNING IT IS VERY IMPORTANT TO ALWAYS IT IS VERY IMPORTANT TO BE PROP- Airbags inflate very quickly and with WEAR YOUR SEAT BELT PROPERLY ERLY SEATED. great force. Do not sit on the edge of the EVEN WITH AN AIRBAG.
Page 66
Supplemental Restraint System (SRS) - airbag WARNING WARNING WARNING Infants and small children should never NEVER put REAR-FACING CHILD FRONT-FACING CHILD RESTRAINT ride unrestrained, or lean against the RESTRAINT SYSTEMS or INFANT SYSTEMS should be used in the rear seat instrument panel.
Page 67
Supplemental Restraint System (SRS) - airbag When the impact sensors detect a sufficient How the Supplemental front or side impact to deploy the airbag(s), Restraint System works the appropriate airbag(s) will be deployed. N00407801532 When the airbag control unit detects rollover The SRS includes the following components: of the vehicle, curtain airbags will be deployed.
Page 68
If the vehicle is involved in a severe access to the vehicle or the EDR. and, impact, have the SRS sensors inspected by an authorized Mitsubishi Motors dealer as How fast the vehicle was traveling. soon as possible. Driver’s seat position sensor...
Page 69
SRS sensors inspected by pant on the front passenger’s seat or a child in correctly, observe the following instruc- an authorized Mitsubishi Motors dealer as a child restraint system. In this case, the pas- tions. Failure to follow these instructions soon as possible.
Page 70
If any of the following conditions occur, authorized Mitsubishi Motors dealer as Type 1 there may be a problem with the SRS air- soon as possible: bags and/or seat belt pre-tensioners, and •...
Page 71
Supplemental Restraint System (SRS) - airbag designed to deploy at the same time as the Driver’s and passenger’s front driver’s front airbag. airbag system N00407901331 The driver’s airbag is located under the pad- ded cover in the middle of the steering wheel. The front passenger’s airbag is contained in the instrument panel above the glove com- partment.
Page 72
Supplemental Restraint System (SRS) - airbag Deployment of front airbags N00408001616 The front airbags and driver’s knee airbag ARE DESIGNED TO DEPLOY when … Head-on collision with a solid wall at speeds of Moderate to severe frontal impact within the shaded approx.
Page 73
Supplemental Restraint System (SRS) - airbag they cannot provide protection to the occu- The front airbags and driver’s Collision with a utility pole, tree or other pants. knee airbag MAY NOT DEPLOY narrow object Some typical situations are shown in the when …...
Page 74
Supplemental Restraint System (SRS) - airbag The front airbags and driver’s WARNING Collision with an elevated median/island or knee airbag MAY DEPLOY when curb Do not attach anything to the steering wheel’s padded cover, such as trim mate- … rial, badges, etc.
Page 75
Supplemental Restraint System (SRS) - airbag WARNING WARNING Side airbag system Do not attach additional keys or accesso- Do not place objects, such as packages or N00408101431 The side airbags (A) are contained in the ries (hard, pointed or heavy objects) to the pets, between the airbags and the driver ignition key.
Page 76
Supplemental Restraint System (SRS) - airbag Curtain airbag system WARNING WARNING The side airbags and curtain airbags can Do not place any objects around the area N00419201315 The curtain airbags are contained in the front cause serious injury or death to anyone where the side airbags deploy.
Page 77
Supplemental Restraint System (SRS) - airbag WARNING WARNING Deployment of side airbag and curtain airbag Do not put a hanger or any heavy or Do not allow a child to lean against or sit pointed object on the coat hook. If the cur- close to the passenger door, even if the N00408201591 tain airbag was activated, any such item...
Page 78
Supplemental Restraint System (SRS) - airbag The seat belts in your vehicle are your pri- Since the side airbags and curtain airbags do Oblique side impact mary means of protection in an accident. The not protect the occupant in all types of side SRS side airbags and curtain airbags are collisions, be sure to always wear the seat designed to provide additional protection.
Page 79
Mitsubishi Motors dealer so that the SRS can adversely affect SRS performance and be made safe for disposal.
Page 80
Pacific Marketing, Inc. Mitsubishi Motor Sales of Caribbean, P.O. Box 698 [For vehicles sold in U.S.A.] Inc. PAGO PAGO, To contact Mitsubishi Motors North Customer Service Department AMERICAN SAMOA AS, 96799 America, Inc. P.O. Box 192216 call 1-888-648-7820 or write to: SAN JUAN PR 00919-2216 Mitsubishi Motors North America, Inc.
Page 81
Supplemental Restraint System (SRS) - airbag Warning label N00408600354 Occupant restraint warning labels for the SRS are located in the vehicle as shown in the illustration. * - Located in the passenger’s side as well. 4-52 Seat and restraint systems...
Features and controls Break-in recommendations ..............5-3 Cautions on the handling of 4-wheel drive vehicles .....5-91 Keys ....................5-3 Service brake .................5-92 Electronic immobilizer (Anti-theft starting system) ......5-4 Brake auto hold (if so equipped) ............5-93 Keyless entry system (if so equipped) ..........5-7 Hill start assist (if so equipped) ............5-95 Free-hand Advanced Security Transmitter (F.A.S.T.-key) Brake assist system ................5-96...
Page 83
Features and controls Information screen display (Vehicle equipped with the multi information display - Type 1) ....................5-206 Combination headlights and dimmer switch ....... 5-207 Headlight leveling switch (if so equipped) ........5-216 Turn signal lever ................5-217 Hazard warning flasher switch ............ 5-218 ECO mode switch ................
Break-in recommendations Type 2 Break-in recommendations Keys N00508701366 N00508801716 Two F.A.S.T.-keys and two emergency keys Advanced automobile manufacturing tech- are provided. Type 1 niques permit you to operate your new vehi- Keep one F.A.S.T.-key and one emergency cle without requiring a long break-in period key in a safe place together as a set of spare Two keys are provided.
If you lose your key, to prevent the theft of (Anti-theft starting system) the vehicle immediately contact an autho- NOTE rized Mitsubishi Motors dealer. N00509101891 In the following cases, the vehicle may not If you notify an authorized Mitsubishi...
Page 86
Take your vehicle and all remaining keys to NOTE NOTE your authorized Mitsubishi Motors dealer to • When the key contacts a key ring or other In cases like the above, move the offending have your ID code changed.
Page 87
(specially cut for starts blinking. When registration of the your vehicle at your Mitsubishi Motors • the immobilizer display does not come on ID code is complete, the immobilizer dis- within 30 seconds after step 4.
Keyless entry system (if so equipped) General information NOTE Keyless entry system (if so On vehicles equipped with the mirror retrac- N00562301094 equipped) tor switch, the outside rearview mirrors auto- Your electronic immobilizer operates on a N00509002031 matically retract or extend when the doors radio frequency subject to Federal Communi- Press the remote control transmitter buttons and the liftgate are locked or unlocked using...
Page 89
Keyless entry system (if so equipped) Within approximately 2 seconds, press the In a vehicle equipped with the Smartphone Operation of the outside rear- UNLOCK button one more time to unlock all Link Display Audio, it is possible to change view mirrors (Vehicles the doors and liftgate.
Page 90
Keyless entry system (if so equipped) 1. Remove the key from the ignition switch. 4. Release in sequence the UNLOCK and condition of the door and liftgate unlock 2. Open the driver’s door and turn the com- LOCK buttons within 5 seconds of press- function.
Page 91
Registering the ID code can be done by your- 1 second. button (2) for 4 to 10 seconds. Then press self or by your authorized Mitsubishi Motors 2. The headlights will blink on and off and and hold the LOCK button (1).
Page 92
Mitsubishi Motors dealer. A maximum The remote control transmitter can be used ance could void the user’s authority to oper- of 8 remote control transmitters can be pro- ate the equipment.
Page 93
4. Remove the old battery. You may purchase a replacement battery at an electric appliance store. An authorized Mitsubishi Motors dealer can replace the battery for you if you prefer. CAUTION When the remote control transmitter case is opened, be careful to keep water, dust, etc.
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped) WARNING WARNING Free-hand Advanced Secu- rity Transmitter (F.A.S.T.- Individuals who use implantable pace- Individuals using other electro-medical makers or implantable cardiovascular- apparatus besides implantable pacemak- key) (if so equipped) defibrillators should keep away from the ers and implantable cardiovascular-defi- external and internal transmitters.
Page 95
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped) NOTE Operating range of the Operating range for locking and unlocking the doors and the lift- F.A.S.T.-key • The key is carried together with other com- munication devices such as cellular phones gate N00503201177 or radios, or electrical appliances such as...
Page 96
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped) NOTE To operate using the F.A.S.T.- Even if the F.A.S.T.-key is within about 2.3 feet (70 cm) of the handle of the driver’s N00503401326 door, front passenger’s door or liftgate, the system may not operate if the key is close to To lock the ground or in a high position.
Page 97
Driver’s door lock/unlock switch The time within which locking confirmation is possible can be adjusted. See an autho- rized Mitsubishi Motors dealer for details. On a vehicle equipped with the Smartphone Link Display Audio, the function can be adjusted on the screen. For details, refer to the separate owner’s manual.
Page 98
The time within which locking confirmation retractor switch) is possible can be adjusted. See an autho- N00585700056 rized Mitsubishi Motors dealer for details. On a vehicle equipped with the Smartphone To retract Link Display Audio, the function can be adjusted on the screen.
Page 99
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped) outside rearview mirrors to their extended Electronic immobilizer (Anti- Engine switch positions. theft starting system) N00513501115 To prevent vehicle theft, no F.A.S.T.-keys The outside rearview mirrors are not initially N00529600114 other than those registered in advance can be set to work as described above.
Page 100
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped) The indicator light on the engine switch illu- CAUTION minates orange. If the engine switch operation is not smooth and feels like it is sticking, do not operate the ON switch.
Page 101
It is possible to modify functions as follows: For details, we recommend you to consult an N00568101065 authorized Mitsubishi Motors dealer. After approximately 30 minutes has elapsed • The time until the power cuts out can be On vehicles equipped with the Smartphone changed to approximately 60 minutes.
Page 102
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped) Type 1 Type 2 Item Solution Note Display Buzzer Indicator Buzzer Fall of battery Inner buzzer No sounds The battery of the F.A.S.T.-key is The warning is not activated if the voltage sounds once run down.
Page 103
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped) Type 1 Type 2 Item Solution Note Display Buzzer Indicator Buzzer Key lock-in Inner buzzer Outer When the operation mode is in Make sure you have the F.A.S.T.- prevention sounds once buzzer OFF, the F.A.S.T.-key is left in the key with you before locking the system...
Page 104
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped) Type 1 Type 2 Item Solution Note Display Buzzer Indicator Buzzer Operation Inner buzzer Outer When the operation mode is in any — mode OFF sounds once buzzer mode other than OFF, all the doors reminder sys- sounds and the liftgate are closed, and...
Page 105
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped) Steering wheel lock To unlock NOTE (if so equipped) When the steering wheel does not unlock, N00514301080 the warning display will appear. Press the The following methods can be used to unlock engine switch again while moving the steer- the steering wheel.
Page 106
Mitsubishi Motors dealer. If the engine will not start because the bat- Starting the engine tery is weak or discharged, refer to Warning display “Jump-starting the engine”...
Page 107
In such a case, the engine up. These will disappear as the engine warms local Mitsubishi Motors dealer or a repair revolutions do not rise to over 5,000 rpm facility of your choice for assistance.
Page 108
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped) NOTE If the F.A.S.T.-key is not operat- NOTE ing properly If you have to bring the engine to an emer- Remove the object or additional key from the gency stop while driving, press and hold the F.A.S.T.-key before inserting the key into the N00568301083 engine switch for 3 seconds or more, or press...
Page 109
Motors dealer by referring to the key number. 1- Insert or remove the emergency key To prevent vehicle theft, take your vehicle 2- Lock and the remaining F.A.S.T.-keys to an autho- 3- Unlock rized Mitsubishi Motors dealer to have the ID codes reprogrammed. 5-28 Features and controls...
Page 110
You can program new F.A.S.T.-keys to the Registering the ID code can be done by your system if you have two valid (already regis- authorized Mitsubishi Motors dealer. Or it tered) F.A.S.T.-keys and a blank (not regis- can be done by yourself (except for vehicles tered) F.A.S.T.-key.
Page 111
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped) 7. Release in sequence the LOCK and 3- Power liftgate button (if so equipped) NOTE UNLOCK buttons within 10 seconds of 4- PANIC button The immobilizer display will go off immedi- pressing the LOCK button in step 6.
Page 112
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped) To unlock Answerback function NOTE On a vehicle equipped with the Smartphone Link Display Audio, the functions can be Press the UNLOCK button (2) to unlock the The horn and turn signal lights of the keyless adjusted on the screen.
Page 113
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped) condition of the door and liftgate unlock Number of Operating the power liftgate To lock To unlock function. chimes N00579500020 Six chimes Two flashes No flash After unlocking the doors and the liftgate, the Number Condition power liftgate can be operated by pressing the...
Page 114
CAUTION If you lose your F.A.S.T.-key, please contact Changes or modifications not expressly an authorized Mitsubishi Motors dealer for a approved by the manufacturer for compli- replacement. ance could void the user’s authority to oper- If you wish to obtain an additional F.A.S.T.- ate the equipment.
2- Lock Never leave a child alone in the vehicle. In An authorized Mitsubishi Motors dealer can 3- Unlock addition to the risk of heat stroke, chil- replace the battery for you if you prefer.
Page 116
Door locks 2. Be sure the keys are not inside the vehi- NOTE To lock or unlock the door from cle. Close the door. the inside When locking or unlocking with the key, only the driver’s door will be locked or unlocked.
Power door locks display. (Color liquid crystal display type To lock and unlock the doors Power door locks only) and liftgate N00509301617 Lock out protection NOTE When locking or unlocking with the key on N00517301052 Using the power door lock switch the driver’s door, only the driver’s door will If the key is in the ignition switch or the oper- lock or unlock.
These functions are not activated when the vehicle is shipped from the factory. To acti- vate or deactivate these functions, please contact your authorized Mitsubishi Motors dealer. Using the ignition switch or the 1- To lock...
Liftgate (except for vehicles equipped with the power liftgate) door can be opened using the inside door han- WARNING dle. When opening the liftgate, always fully open it. A partially opened liftgate can WARNING unexpectedly close due to its own weight. ...
Power liftgate (if so equipped) NOTE CAUTION Power liftgate (if so equipped) On vehicles equipped with the mirror retrac- Before starting the vehicle, be sure to con- N00575900026 tor switch, the outside rearview mirrors auto- firm that the liftgate is locked. If the liftgate Before operating the power liftgate, unlock matically extend when the liftgate and all opens while driving the vehicle, objects...
Page 121
Power liftgate (if so equipped) WARNING Automatic operation When opening and closing the power lift- N00576500045 When the power liftgate main switch (A) is gate, make sure that there are no people nearby and be careful not to hit your head on, the power liftgate can be operated using or pinch your hands, neck, etc.
Page 122
Power liftgate (if so equipped) The power liftgate is completely closed. CAUTION NOTE The power liftgate is unlocked. Do not apply excessive force to the power If one of the power liftgate switches is oper- liftgate when opening or closing it. Doing so ated while the power liftgate is operating, the <Using the open switch on the power lift- could damage to the power liftgate.
Page 123
Power liftgate (if so equipped) <Using the driver’s side power liftgate switch •While open: The warning buzzer sounds or the close switch on the power liftgate> and the power liftgate com- pletely closes. The operation mode is in ON with the If the power liftgate switch is pressed once selector lever in the “P”...
Page 124
Power liftgate (if so equipped) If the driver’s side power liftgate switch is liftgate will open after the warning buzzer If the close switch on the power liftgate is pressed once while the power liftgate is oper- sounds and the hazard warning flasher blinks. pressed, the power liftgate will close after the ating, the warning buzzer will sound and the warning buzzer sounds 3 times and the hazard...
Page 125
Power liftgate (if so equipped) CAUTION Sudden operation prevention mechanism Do not damage the auto reverse sensor, when loading or unloading luggage. If the sensor is damaged, the power liftgate will not close If the engine is started while the power lift- automatically.
Page 126
Power liftgate (if so equipped) NOTE CAUTION When the battery is discharged or discon- Do not fully close the power liftgate with nected, the power liftgate cannot be opened your hand still on the power liftgate grip. even manually. At that time, the liftgate can Doing so could trap and injure your hand or be opened only by using the inside liftgate arm.
Inside liftgate release Liftgate Power liftgate You and your family should familiarize your- 3. Push out on the liftgate to open it. NOTE selves with the location and operation of the The power liftgate easy closer operates even liftgate release lever. CAUTION when the power liftgate main switch is OFF.
Page 128
Theft-alarm system At this time, the theft-alarm indicator (A) CAUTION NOTE on the instrument panel flashes for confir- Do not modify or add parts to the theft-alarm The system will be disarmed if, while the mation. system. Doing so could cause the theft-alarm theft-alarm indicator is illuminated, the fol- to malfunction.
Page 129
Theft-alarm system Type of alarm Alarm deactivation Disarm...by using the keyless entry system or F.A.S.T.-key operation N00582500040 N00582600025 When the alarm is activated: The alarm can be deactivated in the following ways. 1. The headlights blink on and off for 3 min- utes.
Power window control Testing the theft-alarm system WARNING Power window control Never leave the vehicle without carrying N00510601157 N00510800383 the key. Use the following procedure to test the sys- Never leave children or unreliable adults tem: unattended inside the vehicle. 1.
Page 131
Power window control stopped. However, once the driver’s door or Main switch Sub switch the front passenger’s door is opened, the N00548701137 N00548800102 power windows cannot be operated. The main switch located on the driver’s door can be used to operate all the windows. Lock switch A window can be opened or closed by operat- N00549001166...
Sunroof (if so equipped) WARNING CAUTION What to do if you hear wind buffeting when driving Before driving with a child in the vehicle, The safety mechanism is deactivated while be sure to lock the window switch to make the switch is pulled up.
Page 133
If the sunroof does not return to normal, The sunroof can be opened or closed for a 30- with the sunroof in this position, wind buf- consult an authorized Mitsubishi Motors second period after the engine is stopped. feting is lower than with the sunroof fully dealer.
Parking brake Sunshade NOTE NOTE When leaving the vehicle unattended, be Operating the sunroof repeatedly with the The sunshade can be opened or closed manu- sure to close the sunroof and carry the key. engine turned off will run down the battery. ally while the sunroof is closed.
Page 135
Parking brake Lever type parking brake To release CAUTION (if so Before driving, be sure that the parking equipped) brake is fully released and brake warning N00593100020 light is off. If you drive without the parking brake fully To apply released, the warning display will appear on the information screen in the multi-informa- tion display.
Page 136
Refer to “Jump-starting the engine” contact an authorized Mitsubishi Motors CAUTION on page 8-2. dealer or a repair facility of your choice.
Page 137
If the vehicle acceleration is still slow, contact the nearest authorized After the Electric parking brake switch has Mitsubishi Motors dealer or a repair facility been operated to apply or release the Electric of your choice.
1- Wheel lock Immediately contact the nearest authorized ing brake can release by an automatic opera- 2- Release Mitsubishi Motors dealer or a repair facility tion, the Electric parking brake may be of your choice. For details, refer to “Electric released automatically.
Page 139
Inside rearview mirror To adjust the vertical mirror To adjust the mirror position Type 1 position It is possible to move the mirror up/down and left/right to adjust its position. It is possible to move the mirror up and down to adjust its position.
Page 140
Inside rearview mirror To reduce the glare Type 2 NOTE Do not hang items on, or spray glass cleaner When the headlights of the vehicles behind on the sensor (1), as reduced sensitivity you are very bright, the reflection factor of Type 1 could result.
Outside rearview mirrors Type 3 NOTE Outside rearview mirrors Do not hang items on, or spray glass cleaner N00512201232 When the headlights of the vehicles behind on the sensor (2), as reduced sensitivity Adjust the outside rearview mirrors only after you are very bright, the reflection factor of could result.
Page 142
Outside rearview mirrors 4- Left WARNING To adjust the mirror position Your passenger’s side mirror is convex. NOTE N00549101167 The outside rearview mirrors can be adjusted The objects you see in the mirror will look After adjusting, return the lever to the smaller and farther away than they when the ignition switch is in the “ON”...
Page 143
Outside rearview mirrors For vehicles equipped with the mirror CAUTION Retracting and extending the mir- retractor switch rors without using the mirror It is possible to retract and extend the mirrors by hand. After retracting a mirror using the retractor switch (automatic exten- mirror retractor switch, however, you should Retracting and extending the mir-...
For further information, please contact your When the rear window defogger switch is driver’s door closed, and automatically authorized Mitsubishi Motors dealer. pressed with the engine running, the outside retract when the ignition switch is turned to On vehicles equipped with the Smartphone rearview mirrors are defogged or defrosted.
Page 145
“ON” position. For details, we recommend you to consult an NOTE authorized Mitsubishi Motors dealer. LOCK (Type 2) Your vehicle is equipped with an electronic On vehicles equipped with the Smartphone immobilizer. To start the engine, the ID code...
Steering wheel lock (if so equipped) Steering wheel lock (if so equipped) N00512501235 [For vehicles equipped with the Free-hand Advanced Security Transmitter (F.A.S.T.- key).] For information on operations for vehicles equipped with the Free-hand Advanced Secu- rity Transmitter (F.A.S.T.-key), refer to “Free-hand Advanced Security Transmitter NOTE (F.A.S.T.-key): Steering wheel lock”...
Starting the engine “Free-hand Advanced Security Transmitter To lock WARNING (F.A.S.T.-key): Starting” on page 5-13. Never run the engine in a closed or poorly ventilated area any longer than is needed [Except for vehicles equipped with the Remove the key at the “LOCK” position. to move your vehicle out of the area.
Page 148
If the performance. engine still will not start, contact your When the engine is hard to start local Mitsubishi Motors dealer or a repair NOTE facility of your choice for assistance. After several attempts, you may experience ...
Automatic transaxle (if so equipped) The individual gears are selected automati- NOTE Automatic transaxle (if so cally, depending on the position of the gear During the break-in period or immediately equipped) selector lever, the speed of the vehicle and the after reconnecting the battery, your vehicle position of the accelerator pedal.
Page 150
This will cause the vehicle to Immediately have your vehicle checked by an “jump” forward or backward. authorized Mitsubishi Motors dealer or a repair facility of your choice. 4. Depress the brake pedal with the right NOTE If you need to move the vehicle, shift the foot.
Page 151
It is safe to continue driving if the indicator no longer blinks. If the indicator continues blinking, contact an authorized Mitsubishi Motors dealer or a repair facility of your choice immediately. NOTE [If the indicator blinks slowly (once per 2 ...
Page 152
(REVERSE) position while the vehicle is in warning display remains, contact an autho- motion. If the lever is shifted into the “P” rized Mitsubishi Motors dealer or a repair (PARK) or “R” (REVERSE) position while facility of your choice immediately.
Page 153
Automatic transaxle (if so equipped) WARNING “L” LOW SHIFT SHIFT Never move the selector lever to the “N” DOWN (NEUTRAL) position while driving since This position is for driving up very steep hills you could accidentally slip it into the “P” and for engine braking at low speeds when (PARK) or “R”...
Page 154
Automatic transaxle (if so equipped) CAUTION NOTE Type 1 Type 2 In sports mode, the driver must execute When the selector lever is in the “D” upward shifts in accordance with prevailing (DRIVE) position and sports mode is road conditions, taking care to keep the selected, the vehicle will automatically engine speed below the tachometer’s red...
Page 155
Automatic transaxle (if so equipped) Operation of the automatic CAUTION Waiting transaxle Use the selector lever in the correct shift position in accordance with driving condi- For short waiting periods, such as at traffic N00514501372 tions. lights, the vehicle can be left in gear and held CAUTION Never coast downhill backward in the driv- stationary with the service brake.
2. Move the selector lever to the desired safety device to activate. Have your vehicle manually shift up and shift down the trans- position. checked at an authorized Mitsubishi Motors mission. Refer to “Sports mode” on page dealer or a repair facility of your choice 5-80.
Page 157
“jump” forward or backward. Except for vehicles equipped with sportronic Immediately have your vehicle checked by an steering wheel paddle shifter authorized Mitsubishi Motors dealer or a NOTE repair facility of your choice. If you need to move the vehicle, shift the ...
Page 158
Continuously variable transmission (CVT) (if so equipped) 3. Insert a screwdriver with a cloth over its If the ambient temperature is low, the selector Selector lever position display tip into the notch (A) of the cover. Pry lever position display on the multi informa- N00560401088 gently as shown to remove the cover.
Page 159
If the indicator continues blinking, contact vehicle speed to decrease, In this case, take an authorized Mitsubishi Motors dealer or a one of the following procedures. repair facility of your choice immediately. • Slow down your vehicle.
Page 160
“N” (NEUTRAL) posi- showing. If the warning display remains, the vehicle is in motion, the transmission tion. contact an authorized Mitsubishi Motors may be damaged. dealer or a repair facility of your choice “D” DRIVE immediately.
Page 161
Continuously variable transmission (CVT) (if so equipped) Unlike the manual transaxle, sports mode When returning to “D” (DRIVE) operation, “L” LOW allows shifting with the accelerator pedal the selector lever position display will change depressed. to “D” (DRIVE) position. This position is for driving up very steep hills and for engine braking at low speeds when CAUTION driving down steep hills.
Page 162
Continuously variable transmission (CVT) (if so equipped) NOTE Sports mode display CAUTION To maintain good running performance, the Depress the brake pedal with the right foot at N00560901067 transmission may refuse to perform an all times. In sports mode, the currently selected shift upshift when the sportronic steering wheel Using the left foot could cause driver move- range is displayed on the information screen...
“D” (DRIVE) position or Sports mode posi- driving torque using the electronic control activate. Have your vehicle checked at an tion. coupling in the rear differential assembly. authorized Mitsubishi Motors dealer or a repair facility of your choice immediately. 5-82 Features and controls...
Page 164
Electronically controlled 4WD system (if so equipped) NOTE Drive mode Function Drive mode-selector This mode is for driving in On vehicles with lever type parking brake, if N00548401046 The drive mode can be switched by pressing the parking brake lever is pulled up while the slippery conditions, such as vehicle is moving, the front-rear distribution the drive mode switch while the ignition is in...
Page 165
Electronically controlled 4WD system (if so equipped) After a few seconds, the information screen NOTE CAUTION returns from the drive mode display to the The drive mode can be switched while driv- If the selected drive mode indicator begins previous screen.
ECO mode switch is switched Electronically Controlled 4WD OFF. Have your vehicle inspected by an autho- rized Mitsubishi Motors dealer. The electronically controlled 4WD is a sys- For vehicles equipped with mono-color liq- S-AWC (Super-All Wheel tem that improves acceleration performance...
Page 167
S-AWC (Super-All Wheel Control) (if so equipped) The Differential assembly that limits the front CAUTION S-AWC left-right differential speed by operating elec- drive Function Control of the braking force does not tronic control clutch arranged in the transfer mode enhance the stopping performance of the assembly.
Page 168
Have your vehicle inspected by an autho- switch to protect the drive-system compo- NOTE rized Mitsubishi Motors dealer. nents. A warning will also be displayed in Make sure that all four tires are the same The drive mode can be switched while driv-...
4-wheel drive operation page 5-159. WARNING 4-wheel drive operation Always concentrate on your driving first. N00530601182 Display example Keep your eyes and mind on the road. Dis- Your vehicle has been designed primarily for tractions while driving can lead to an acci- use on pavement.
Page 170
(downshifting). paved road will increase fuel consumption, sures. with possible noise generation. Mitsubishi Motors is not responsible to the operator for any damage or injury caused or CAUTION liability incurred by improper and negligent Turning sharp corners operation of a vehicle.
Page 171
4-wheel drive operation Driving on sandy or muddy CAUTION Climbing/descending sharp roads grades • If the “ ” warning display and “SLOW DOWN” or the “ ” warning display and Set the drive mode-selector to “4WD LOCK” Your vehicle may not provide sufficient hill “SERVICE REQUIRED”...
Do not change the selector lever posi- page 11-7. Mitsubishi Motors dealer or a repair facil- tion while driving through water. Be sure all four tires and wheels are the ity of your choice as soon as possible to...
Service brake Towing Jacking up a 4-wheel drive CAUTION vehicle It is important not to drive the vehicle with your foot resting on the brake pedal when braking is not required. This practice can WARNING result in very high brake temperatures, pre- mature lining wear, and possible damage to ...
If you hear this sound, have the brake pads the “P” (PARK) position. replaced at an authorized Mitsubishi Motors Do not use brake auto hold system when driving on slippery roads. The system may dealer or a repair facility of your choice.
Page 175
Brake auto hold (if so equipped) NOTE NOTE To activate brake auto hold When the brake auto hold system cannot be • When there is a malfunction in the system When the vehicle is stopped by depressing used, a buzzer will sound and the message the brake pedal with the selector lever in any will appear on the information screen in the position other than “P”...
Hill start assist (if so equipped) NOTE NOTE To turn off brake auto hold • When shifting the selector lever to the “P” If the Electric parking brake cannot be Press the brake auto hold switch to turn off (PARK) or “R” (REVERSE) position with applied automatically due to the system mal- the brake auto hold.
Brake assist system 3. Depress the accelerator pedal and the hill Warning display CAUTION start assist will gradually decrease the Do not overly rely on the hill start assist to braking force as the vehicle starts moving. prevent backwards movement of the vehicle. Under certain circumstances, even when hill NOTE start assist is activated, the vehicle may...
Anti-lock braking system Operation of anti-lock braking system is CAUTION NOTE not restricted situations where brakes are The brake assist system is not a device When the anti-lock brake system warning applied suddenly. This system may also designed to exercise braking force greater light or only active stability control warning prevent the wheels from locking when...
Page 179
(The standard brake system is functioning choice as soon as possible. mph (5 km/h). normally.) If this happens, take your vehicle to an authorized Mitsubishi Motors dealer or a repair facility of your choice. If the anti-lock braking system Anti-lock braking system warn- •...
Avoid hard braking and high-speed driving. the steering wheel extremely hard to turn, Stop the vehicle in a safe place and contact an possibly resulting in an accident. authorized Mitsubishi Motors dealer or repair facility of your choice. NOTE NOTE ...
ASC is not active. engine is running, have the vehicle inspected ronmental conditions. by an authorized Mitsubishi Motors dealer or Be sure to use the same specified type and a repair facility of your choice as soon as size of tire on all four wheels.
Page 182
Active stability control (ASC) CAUTION ASC OFF switch NOTE When driving a vehicle on a snowy or icy Using the ASC OFF switch turns off both the N00559401307 road, be sure to install snow tires and drive stability control function and the traction The ASC is automatically activated when the the vehicle at moderate speeds.
Page 183
N00546601129 indicator will blink. by an authorized Mitsubishi Motors dealer or If an abnormal condition occurs in the sys- a repair facility of your choice as soon as To prevent the brake system from overheat- tem, the following display/indicator will turn possible.
Cruise control (if so equipped) Cruise control switches To activate Cruise control (if so equipped) N00518401395 N00518301626 1. With the operation mode in ON, press the Cruise control is an automatic speed control CRUISE CONTROL ON/OFF switch (A) system that keeps a set speed. It can be acti- to turn on the cruise control.
Page 185
Cruise control (if so equipped) The “SET” indicator appears on the infor- When you reach your desired speed, release mation display in the meter cluster. (For the switch. Your new cruising speed is now vehicles equipped with color liquid crys- set.
Page 186
Cruise control (if so equipped) To slow down your speed in small amounts, NOTE push down the SET - switch (B) for less than To temporarily increase or In some driving conditions, the set speed about 1 second and release it. decrease the speed driving may be deactivated.
Page 187
Cruise control (if so equipped) The set speed driving is deactivated automati- CAUTION cally in any of the following ways. When the set speed driving is deactivated automatically in any situation other than When your speed slows to about 10 mph those listed above, there may be a system (15 km/h) or more below the set speed malfunction.
Adaptive Cruise Control System (ACC) (if so equipped) To resume the set speed Adaptive Cruise Control System (ACC) N00518901374 (if so equipped) If the set speed driving is deactivated by the N00576800048 condition described in “To deactivate” on page 5-106, you can resume the previously ACC maintains a set speed with no need for set speed by push up the RES+ switch (C) you to use the accelerator pedal.
Page 189
Adaptive Cruise Control System (ACC) (if so equipped) 3- Set speed indicator: Cruise control switch NOTE Indicating the set speed. Operate the individual switches correctly and N00577000021 If the set speed is not set, “---” is one after another. shown.
Page 190
Adaptive Cruise Control System (ACC) (if so equipped) 5-Following distance indicator: How to use ACC NOTE Indicating the following distance. Every time the operation mode is turned to N00577200052 Two states: “Stand by” and “Active” the “OFF” position, the ACC is turned off. When a front vehicle is detected while To turn on ACC the ACC is activated, the ‘Active’...
Page 191
Adaptive Cruise Control System (ACC) (if so equipped) You can set the speed anywhere from approx- To activate ACC control NOTE imately 25 mph (40 km/h) to 110 mph (180 • When an abnormality in the ACC system km/h). With the ACC turned on, push down the has been detected.
Page 192
Adaptive Cruise Control System (ACC) (if so equipped) NOTE If the brake pedal is not depressed within 2 seconds after your vehicle has been stopped by the ACC, a warning buzzer will sound, the above warning will be shown in the multi information display to alert the driver, and the ACC control will be canceled.
Page 193
Adaptive Cruise Control System (ACC) (if so equipped) WARNING WARNING WARNING When the vehicle in front has changed its The ACC will not decelerate your vehicle • When the height of a vehicle in front is course or lane, if a stationary vehicle and/or give the approach alarm in the fol- extremely low or the road clearance of appears in front your vehicle, the ACC...
Page 194
Adaptive Cruise Control System (ACC) (if so equipped) WARNING CAUTION • When driving on a winding road. To maintain proper performance of the ACC: • Always clean the surface of the radar sen- sor. • Avoid impacting the radar sensor or its sur- rounding area.
Page 195
Adaptive Cruise Control System (ACC) (if so equipped) switch and release the accelerator pedal; the To decrease the set speed NOTE new speed is then set in the system. The set speed can be changed even while N00581600028 your vehicle is following a vehicle in front There are two ways to decrease the set speed.
Page 196
Adaptive Cruise Control System (ACC) (if so equipped) NOTE NOTE NOTE The ACC control will not resume after The set speed indication on the display turns You can also cancel the ACC control by releasing the brake pedal. to “---”...
Page 197
Adaptive Cruise Control System (ACC) (if so equipped) In any of the situations listed below, the ACC When the ACC system determines that its If the display keeps showing the message, control is automatically canceled, a buzzer performance has been degraded, a buzzer will there is a possibility that the ACC has a mal- sounds and a message is shown in the multi- sound and a message will be displayed in the...
Page 198
Adaptive Cruise Control System (ACC) (if so equipped) tance will change from “Long” to “Middle”, “Short” NOTE to “Short”, and return to “Long” again.Every When any of the following conditions are time the ACC is turned to ON, the following present, the ACC control cannot be resumed.
Forward Collision Mitigation System (FCM) (if so equipped) and the FCM judges that there is the risk of a General information collision, the system will give audible and N00582100046 visual warnings. For vehicles sold in U.S.A. When the FCM judges that a collision with FCC ID:OAYARS3-B the vehicle or the pedestrian straight-ahead is imminent, the system will automatically...
Page 200
Forward Collision Mitigation System (FCM) (if so equipped) WARNING Forward collision warning function The FCM is designed to help avoid certain frontal collisions or reduce the crash N00577400041 speed in such collisions. It is not a substi- If the system judges that there is a risk of tute for your safe and careful driving.
Page 201
Forward Collision Mitigation System (FCM) (if so equipped) FCM braking function WARNING WARNING If the ASC is turned off, the FCM braking • When a vehicle ahead is not completely N00577700073 When the FCM judges that a collision with function will not operate.
Page 202
Forward Collision Mitigation System (FCM) (if so equipped) WARNING WARNING WARNING • When the system recognizes driver’s • If the pedestrian is wearing loose-fitting • When driving on a curve. steering, accelerating, braking or gear clothes. • When there is a road side object (B) that shifting actions as evasive actions to •...
Page 203
Forward Collision Mitigation System (FCM) (if so equipped) WARNING WARNING FCM ON/OFF switch • When a vehicle in the next lane becomes • When your vehicle is towed or your vehi- N00577800090 This switch is used to turn on or off the FCM, positioned directly in front of your vehi- cle tows another vehicle.
Page 204
Forward Collision Mitigation System (FCM) (if so equipped) When “NEAR” is selected To turn on/off the FCM To change forward collision warn- ing distance Every time the operation mode is put in “ON”, the FCM will automatically be turned The distance to the vehicle ahead which trig- gers the forward collision warnings can be To turn off the FCM, press and hold the FCM selected from three levels, “FAR”, “MID-...
Page 205
If the system becomes temporarily unavail- possibility that the sensor has a malfunction. in range, the system will automatically return able for some reason, the following message Contact an authorized Mitsubishi Motors to operation. may appear. dealer for inspection of the sensor.
Page 206
• Always keep clean the windshield. If the inside of the windshield where the sensor is installed becomes dirty or fogged, contact an authorized Mitsubishi Motors dealer. • Do not apply an impact or load on the sen- sor or its surrounding area.
Mitsubishi Motors dealer. Blind Spot Warning (BSW) If you need to replace the windshield, con- tact an authorized Mitsubishi Motors dealer. (with Lane Change Assist) The sensor emits infrared rays when the so equipped) operation mode is in ON.
Page 208
Blind Spot Warning (BSW) (with Lane Change Assist) (if so equipped) Depending on the relative speed between Detection areas your vehicle and a vehicle in the next lane, N00592300041 the Blind Spot Warning system will detect up The BSW uses two sensors (A) located inside to approximately 230 feet (70 m) from your the rear bumper.
Page 209
BSW may not function properly. Have the vehicle • When the rear of your vehicle is weighed inspected at an authorized Mitsubishi Motors down or your vehicle is leaning to the right or left due to the weight of passen- dealer.
Page 210
Blind Spot Warning (BSW) (with Lane Change Assist) (if so equipped) NOTE When the sensor detects an NOTE approaching vehicle When the operation mode is set to OFF, the • When driving on the entrance and outlet of selected condition just before setting to OFF the tunnel or very near the wall or near the When the BSW indicator light in the instru- is retained.
Page 211
Have the vehicle inspected at an autho- increase of the sensor temperature. When the foreign objects, such as dirt, snow or ice, rized Mitsubishi Motors dealer as soon as warning display does not disappear after adhere to the bumper surface around the sen- possible.
Rear Cross Traffic Alert (RCTA) (if so equipped) General information N00593900044 For vehicles sold in U.S.A. FCC ID:OAYSRR3A This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful inter- ference, and (2) this device must accept any interference received, including interference that may...
Page 213
Rear Cross Traffic Alert (RCTA) (if so equipped) WARNING Detection areas CAUTION Never rely solely on the RCTA when back- • When an approaching vehicle speed is The detection area is shown as illustrated. ing up. The RCTA is an aid system. It is approximately 4 mph (7 km/h) or less.
Page 214
Rear Cross Traffic Alert (RCTA) (if so equipped) To operate General information N00594000042 1. Press the Blind Spot Warning switch For vehicles sold in U.S.A. while the operation mode is put in ON. FCC ID:OAYSRR3A (Refer to “Blind Spot Warning (BSW): To operate”...
Lane Departure Warning System (LDW) (if so equipped) Setting the LDW mode Lane Departure Warning System (LDW) (if so equipped) N00595000023 From the factory, the LDW mode of your N00577900059 vehicle is set to LDW 1 meaning that every The Lane Departure Warning system (LDW) time the ignition switch is turned to the “ON”...
Page 216
Lane Departure Warning System (LDW) (if so equipped) 2. Press again and hold the LDW switch for indicator will be appeared if any of following Turning off the LDW more than 10 seconds. conditions have occurred: N00581000051 3. When you release the LDW switch, the To turn off the LDW, press the LDW switch.
Page 217
• Do not attempt to detach or disassemble the • When driving in an extremely narrow sensor. lane. • Use only Mitsubishi Motors Genuine parts • When the distance between your vehicle when replacing the windshield wipers. and a vehicle in front is short.
Contact your authorized inflation pressure sensors (A) on the wheels After having cleaned the windshield, the sys- Mitsubishi Motors dealer for inspection of the to monitor the tire inflation pressures. The tem will automatically return to operation.
Page 219
The tire pressure monitoring system is not a For details, please contact your authorized substitute for regularly checking tire infla- Mitsubishi Motors dealer. If one or more of the vehicle tires (except for tion pressures. the spare tire) is significantly under-inflated,...
Page 220
Accordingly, when the low tire pressure tell- replacement or alternate tires or wheels on the authorized Mitsubishi Motors dealer. tale illuminates, you should stop and check vehicle that prevent the TPMS from function-...
Page 221
Mitsubishi Motors dealer. If the tire repair is not done by illuminates while driving 2. If the tire pressure monitoring system an authorized Mitsubishi Motors dealer, it is warning light remains illuminated after N00532801511 not covered by your warranty.
Page 222
“ ” (tire Mitsubishi Motors dealer, it is not covered by your warranty. ID set change). 1. Transit the display by multi information display switch until the tire pressure mon- itoring system (TPMS) SET indicator is displayed.
Rear-view camera (if so equipped) 2. Hold down the multi information display General information Rear-view camera (if so switch for 10 seconds or more. (A beep is N00533001233 equipped) heard.) Your tire pressure monitoring system oper- (Although the reset execution starts at N00546201301 ates on a radio frequency subject to Federal holding down the switch for 3 seconds,...
Page 224
Rear-view camera (if so equipped) Location of rear-view camera Reference lines on the screen CAUTION The rear-view camera uses a wide-angle The rear-view camera (A) is in the liftgate, at Reference lines and upper surface of the rear lens. As a result, images and distances shown the left side of the liftgate handle.
Multi Around Monitor (if so equipped) Multi Around Monitor (if so Case 2 equipped) N00587200055 The Multi Around Monitor system uses four cameras, “Front-view camera”, “Side-view cameras (right and left)” and “Rear-view camera”, and displays composite views from A- Actual objects those cameras on a screen in the DISPLAY B- Objects shown on the screen AUDIO or the Smartphone Link Display...
Page 226
Multi Around Monitor (if so equipped) CAUTION CAUTION Before using the Multi Around Monitor, To avoid damaging the camera; make sure that all doors and the liftgate are • Do not rub the cover excessively or polish closed and the outside mirrors are unfolded. it by using an abrasive compound.
Page 227
Multi Around Monitor (if so equipped) Range of view of the Multi Around Monitor N00587300027 The range of view of the Multi Around Monitor cameras is limited to the area shown in the illustrations. It cannot show around the both sides and the lower part of the front and rear bumpers, etc.
Page 228
Multi Around Monitor (if so equipped) Types of views of the Multi Side-view/Rear-view mode Side-view/Front-view mode Around Monitor Views of the passenger’s side of the vehicle Views of the passenger’s side of the vehicle N00587400044 and behind the vehicle are displayed. and the front of the vehicle are displayed.
Page 229
Multi Around Monitor (if so equipped) NOTE NOTE Operation with the switch • When water drops or condensation are on The passenger’s side screen can be switched When the camera switch (A) is pressed, the the lens. to the side-view by pressing the camera bird’s eye-view/front-view is displayed.
Page 230
Have the vehicle inspected by an appears. view mode. When you shift the selector lever authorized Mitsubishi Motors dealer. to any other position, the driver’s side screen switches to the front-view mode. Switching of the screen (Selector ...
Page 231
Multi Around Monitor (if so equipped) 2- Approximately 79 inches (200 cm) Rear-view mode from the rear edge of the rear bumper N00587700021 Reference lines for the distance and the vehi- CAUTION cle width and upper surface of the rear bum- ...
Page 232
Multi Around Monitor (if so equipped) CAUTION CAUTION CAUTION • When the rear of the vehicle is weighed • When there is a downward slope behind the • When the vehicle is approaching a truck, down with the weight of passengers and vehicle, objects shown on the screen will the reference lines indicate that your vehi- luggage in the vehicle.
Page 233
Multi Around Monitor (if so equipped) CAUTION NOTE Side-view mode • When there is an object behind the vehicle When the expected course lines are dis- N00587900023 Reference lines for the vehicle width and the that has upper sections projecting in the played in the rear-view, the expected course front end of the vehicle are displayed on the direction of the vehicle, the reference lines...
Page 234
Multi Around Monitor (if so equipped) Bird’s eye-view mode CAUTION NOTE The bird’s eye-view is a composite image • An object having a height from the road N00588000021 An overhead view in which the vehicle is from images captured by the “Front-view surface may seem to appear from the joint looked down is displayed so that you can eas- camera”, “Side-view cameras (right and...
Multi Information display - Type 1 position, average and momentary fuel con- CAUTION NOTE sumption, driving range, average speed, etc. The red zone indicates an engine speed You can adjust to 8 different levels for when beyond the range of safe operation. the front side-marker lights are illuminated It is also possible to change elements such as and when they are not.
Page 237
Multi Information display - Type 1 [With ignition switch or operation mode in ON] 8- Selector lever position display 16- Outside temperature display screen 1- Drive mode indicator display screen (if P.5-70, 5-77 P.5-162 so equipped) P.5-84 9- Engine coolant temperature display 2- S-AWC drive mode display screen (if ...
Page 238
Multi Information display - Type 1 It is also possible to change elements such as Multi information display the language and units used on the multi switch information display by operating the multi information display switch. N00555101205 Each time the multi information display switch is operated, the buzzer sounds and the multi information display changes between information such as warnings, trip odometer,...
Page 239
Multi Information display - Type 1 1- Trip odometer P.5-162 2- Trip odometer P.5-162 3- ECO score display P.5-166 4- Service reminder P.5-163 5- Redisplay of a warning display screen P.5-161 Information screen (With the ignition switch is turned from the “OFF” or “LOCK” position to the “ON”...
Page 240
Multi Information display - Type 1 Information screen (With the ignition switch or the operation mode in ON) N00556201232 Each time you lightly press the multi information display switch, the display screen switches in the following order. *: When there is a warning display 1- Trip odometer ...
Page 241
Multi Information display - Type 1 9- Function setting screen P.5-167 10- Redisplay of a warning display screen P.5-161 NOTE While driving, the service reminder are not displayed even if you operate the multi information display switch. Always stop the vehicle in a safe place before operating.
Page 242
Multi Information display - Type 1 warning display screen Door ajar warning display If you want to switch the display screen N00555201222 Warning display screens with a “ ” or “ ” This is displayed when you press the multi N00529700030 mark displayed in the upper right of the information display switch and return from...
Page 243
Multi Information display - Type 1 CAUTION NOTE NOTE It may take several seconds to stabilize the On hills or curves, the display may be incor- If the engine is overheating, “ ” will blink. display after refilling the tank. rect due to the movement of fuel in the tank.
Page 244
The service reminder time can be modified To reset the trip odometer by an authorized Mitsubishi Motors dealer, At that time, when the ignition switch is to adjust for severe usage, etc. Refer to switched from the “OFF” or “LOCK”...
Page 245
If you accidentally reset the display, consult from OFF to ON. an authorized Mitsubishi Motors dealer for assistance. 1. When you lightly press the multi informa- tion display switch, the information...
Page 246
Multi Information display - Type 1 Driving range display Average fuel consumption dis- NOTE play Disconnecting the battery cable will erase N00575201026 from memory the manual reset mode or auto Shows the approximate driving range (how N00575301027 reset mode setting for the average fuel con- many more miles or kilometers you can This displays the average fuel consumption sumption display.
Page 247
Multi Information display - Type 1 NOTE NOTE The display setting can be changed to the The display setting can be changed to the ECO drive level preferred units (mph or km/h). preferred units {mpg (US), mpg (UK), Refer to “Changing the function settings”...
Page 248
Multi Information display - Type 1 [When the ignition switch is turned to the 2. When you lightly press the multi informa- NOTE “OFF” or “LOCK” position or the operation tion meter switch, the information screen To return the menu screen to the function set- mode is put in OFF] switches to the function setting screen.
Page 249
Multi Information display - Type 1 Refer to “Changing the time until “REST 1. Press and hold the multi information dis- Manual reset mode REMINDER” is displayed” on page play switch (for about 2 seconds or more) 5-172. to switch from the setting mode screen to ...
Page 250
Multi Information display - Type 1 When the engine switch or the operation 4. Lightly press the multi information dis- Changing the fuel consumption mode is in the following conditions, the play switch to switch to select the units. display unit average fuel consumption display and the 5.
Page 251
Multi Information display - Type 1 Changing the temperature unit NOTE On vehicles equipped with the Smartphone N00557201196 Link Display Audio, the temperature value The temperature display unit can be switched. of the Smartphone Link Display Audio is switched in conjunction with outside temper- 1.
Page 252
Multi Information display - Type 1 3. Press and hold the multi information dis- Changing the language on other Operation sound setting play switch to switch from A/1 (language system to match the multi infor- N00557401156 cooperation: enabled) to M/2/P (language mation display You can turn off the operation sounds of the cooperation: disabled), or from M/2/P to...
Page 253
Multi Information display - Type 1 NOTE NOTE Changing the momentary fuel con- sumption display The operation sound setting only deactivates If the battery is disconnected, the memory of the operation sound of the multi information the unit setting is erased and is automatically N00563601049 display switch and rheostat illumination but- set to the “OFF”.
Multi Information display - Type 2 1. Press and hold the multi information dis- 3- Selector lever position display NOTE play switch (for about 2 seconds or more) P.5-70, 5-77 The tire ID set cannot be returned to the fac- to switch from the setting mode screen to 4- Service reminder ...
Page 255
Multi Information display - Type 2 Information display N00574801070 Each time you lightly press the multi information display switch (A), the display switches in the following order. 6- Average fuel consumption display P.5-176 1- Odometer 7- Outside temperature display P.5-176 2- Trip odometer 8- Service reminder (distance) ...
Page 256
Multi Information display - Type 2 Both trip odometers Odometer NOTE count up to 9999.9 miles/kilometers. You can adjust to 8 different levels respec- N00574901039 When a trip odometer goes past 9999.9 tively for when the front side-marker lights The odometer indicates the total distance the miles/kilometers, it returns to 0.0 miles/ are illuminated and when they are not.
Page 257
Multi Information display - Type 2 NOTE NOTE NOTE When you refuel, the driving range display is The average fuel consumption display can be The display setting can be changed to the updated. reset separately for the auto reset mode and preferred units (°F or °C).
Page 258
NOTE The service reminder time can be modified by an authorized Mitsubishi Motors dealer, to adjust for severe usage, etc. Refer to “Severe maintenance schedule” in your vehi- 1- Full cle’s Warranty and Maintenance Manual. For...
Page 259
Motors dealer or a repair facility of your choice to have the system checked. 3. After your vehicle is inspected at an authorized Mitsubishi Motors dealer, it displays the time until the next periodic 2. Press and hold the multi information dis- inspection.
Page 260
Auto reset mode If you accidentally reset the display, consult 2. Each time you press the multi information an authorized Mitsubishi Motors dealer for When the average fuel consumption is display switch for 2 seconds or more on assistance.
Page 261
Multi Information display - Type 2 2. Each time you press the multi information Changing the fuel consumption NOTE display switch for 2 seconds or more on display unit The display units for the driving range, the outside temperature display, you can average fuel consumption are changed, but N00557101179 switch from °F to °C or from °C to °F unit...
Indicator light, warning light, and information screen display list (multi information display - Type 1) Indicator light, warning light, and information screen display list (multi information display - Type 1) N00557701074 Indicator and warning light list N00557801349 6- Blind Spot Warning (BSW) indicator 11- Anti-lock braking system warning light 1- Position indicator ...
Page 263
• Abnormal voltage or a static electricity discharge is generated by the operation of your vehicle’s electronics (including after-market parts). If the warning display has occurred a number of times, take your vehicle to an authorized Mitsubishi Motors dealer or a repair facility of your choice and have the system checked.
Page 264
Refer to “Washer fluid” on page 9-12. Refer to “Capacity” on page 11-7. There is a malfunction in the LED headlights. Contact an authorized Mitsubishi Motors dealer or a repair facility of your choice to have the system checked.
Page 265
Refer to “Free-hand Advanced Security Transmitter (F.A.S.T.-key)” on page 5-13. There is a fault in the electronic immobilizer. (Anti- Contact an authorized Mitsubishi Motors dealer or a theft starting system). repair facility of your choice to have the system checked.
Page 266
Indicator light, warning light, and information screen display list (multi information display - Type 1) Screen Cause Do this (Reference) The F. A. S. T. -key is not detected. Insert the F. A. S. T. -key into the key slot. Refer to “If the F.
Page 267
Put the operation mode in OFF, and then start the theft starting system). engine again. If the warning is not cancelled, please contact an authorized Mitsubishi Motors dealer or a repair facil- ity of your choice. 5-186 Features and controls...
Page 268
There is a fault in the steering wheel lock. Park your vehicle in a safe place as soon as possible and contact an authorized Mitsubishi Motors dealer or a repair facility of your choice to have the system checked.
Page 269
ON. Refer to “Seat belt warning” on page 4-23. There is a fault in the fuel system. Contact an authorized Mitsubishi Motors dealer or a repair facility of your choice to have the system checked.
Page 270
Then, operate the ignition switch or the engine switch. We recommend you to have the brake auto hold sys- tem inspected by a MITSUBISHI MOTORS Autho- rized Service Point. Refer to “Brake auto hold” on page 5-93. Features and controls...
Page 271
Refer to “Charging system warning display” on page 5-207. There is a fault in the SRS airbag or the pre-tensioner Contact an authorized Mitsubishi Motors dealer or a system. repair facility of your choice to have the system checked, immediately.
Page 272
Cause Do this (Reference) There is a fault in the Active stability control (ASC). Contact an authorized Mitsubishi Motors dealer or a repair facility of your choice to have the system checked. Refer to “Active stability control (ASC)” on page 5-100.
Page 273
Indicator light, warning light, and information screen display list (multi information display - Type 1) Screen Cause Do this (Reference) The electronically controlled 4WD system is hot. Refer to “Electronically controlled 4WD system” on page 5-82. The S-AWC system is hot. Refer to “S-AWC (Super-All Wheel Control)”...
Page 274
This is not a malfunction. There is a fault in the Adaptive Cruise Control Sys- Contact an authorized Mitsubishi Motors dealer or a tem (ACC). repair facility of your choice to have the system checked.
Page 275
Screen Cause Do this (Reference) There is a fault in the Forward Collision Mitigation Contact an authorized Mitsubishi Motors dealer or a System (FCM). repair facility of your choice to have the system checked. Refer to “FCM ON/OFF switch: When a problem is detected”...
Page 276
When the warning display does not disappear after having cleaned the bumper surface around the sen- sor, contact an authorized Mitsubishi Motors dealer. Refer to “Blind Spot Warning (BSW): When there is a foreign objects on the sensor” on page 5-130.
Page 277
This is not a malfunction. warning” on page 5-214. There is a fault in the system of automatic high Contact an authorized Mitsubishi Motors dealer. beam. Refer to “Automatic high beam system: System problem warning” on page 5-214.
Page 278
Indicator light, warning light, and information screen display list (multi information display - Type 1) Other interrupt displays N00558201353 Screen Cause Do this (Reference) When starting the engine, the selector Place the selector lever in the “P” lever is in a position other than the “P” (PARK) position, depress and hold the (PARK) or the “N”...
Page 279
Indicator light, warning light, and information screen display list (multi information display - Type 1) Screen System operation status Reference When “AWC ECO” mode of S-AWC is Refer to “S-AWC (Super-All Wheel Con- selected. trol)” on page 5-85. When “NORMAL” mode of S-AWC is selected.
Page 280
(LDW): Turning off the LDW” on page switched. 5-135. This informs you that a periodic inspection is due. Screen Do this Have an inspection made by an authorized Mitsubishi Motors dealer. For further details, refer to “Service reminder” on page 5-163. Features and controls 5-199...
Page 281
Indicator light, warning light, and information screen display list (multi information display - Type 1) The rest time can be set. Screen Do this Park the vehicle in a safe place, turn off the engine, and take a rest. Use this display as rough guide for taking rests during a long drive. The interval from the start of your trip until this message is displayed can be set.
Indicator and warning light package (multi information display - Type 2) Indicator and warning light package (multi information display - Type 2) N00519801921 9- Electric power steering system warning 18- High coolant temperature warning light 1- Washer fluid level warning light light ...
Indicators 24- Engine malfunction indicator (“SER- High beam indicator NOTE VICE ENGINE SOON” or “Check When the indicator goes out, this should be N00520100086 engine light”) P. 5-204 used as a rough indication of when the heat- A blue light comes on when the headlights 25- Seat belt reminder/warning light ing starts working.
Page 284
Warning lights When the vehicle is moving at more than 5 NOTE CAUTION mph (8 km/h) and parking brake applied, a The ECO drive assist is displayed only when • Should the brakes fail, use engine braking buzzer will sound to inform the driver that the vehicle is driven with the selector lever in to reduce your speed and observe the fol- parking brake is not properly release.
Page 285
When the vehicle is stationary with the indi- system checked as soon as possible at an and contact an authorized Mitsubishi Motors cator on, you must depress the brake pedal dealer. If you inevitably have to park, park...
Page 286
- Type 1, a warning is an authorized Mitsubishi Motors dealer or a driven at high speeds or on hilly roads. This also displayed in the multi information dis- repair facility of your choice.
If this warning is displayed, release the park- rized Mitsubishi Motors dealer or a repair ing brake. facility of your choice. The vehicle should be brought to a halt in the following manner when brake performance is deteriorated.
Mitsubishi Motors may go all the way to the floor. Mitsubishi Motors dealer or a repair facility dealer or a repair facility of your choice. of your choice to have the system checked.
Page 289
Combination headlights and dimmer switch NOTE The daytime running lights illumi- Type 2 nated When it rains, or when the vehicle has been Rotate the switch to operate the lights. washed, the inside of the lens sometimes The daytime running lights illumi- becomes foggy.
Page 290
Have the system checked dance with outside light level. by an authorized Mitsubishi Motors dealer or approximately 3 minutes. a repair facility of your choice. Parking, tail, front and rear side-...
Page 291
Contact an autho- N00549901178 lights) will stay on and will not turn off auto- rized Mitsubishi Motors dealer or a repair To change the headlights from high beam to matically. facility of your choice to have the system low beam and vice versa, pull the turn signal checked.
Page 292
Combination headlights and dimmer switch light in the instrument cluster indicates when NOTE WARNING the headlights are on high beam. If you turn the lights off with the head lights Do not rely solely on the Automatic High set to high-beam illumination, the headlights Beam.
Page 293
Combination headlights and dimmer switch 2. The automatic high beam system indica- NOTE tor will go off and the high beam indicator You can switch the headlight beams illuminates. (high/low) manually by operating the lever 3. The automatic high beam system switch is even if the automatic high beam system is pressed again, the automatic high beam working.
Page 294
• When the windshield is replaced, use the Any of the following factors may influence tail lights, is shining around your vehicle. Mitsubishi Motors genuine parts. the headlight beam switching timing: • A vehicle in front or oncoming vehicle is •...
Page 295
If the warning display remains even after the has been in range, please contact an autho- ignition switch is turned to the “OFF” or rized Mitsubishi Motors dealer. “LOCK” position or the operation mode is put in OFF and then turned back to ON, please contact an authorized Mitsubishi Motors dealer.
Page 296
Combination headlights and dimmer switch Windshield is dirty Welcome light NOTE For details, consult a Mitsubishi Motors N00563201250 dealer. If the automatic high beam system determines This function turns on the front side-marker On vehicles equipped with the Smartphone...
• The coming home light function can be deactivated. 4. The headlights will come on in the low For details, consult a Mitsubishi Motors beam setting for approximately 30 sec- dealer. onds. After the headlights go off, the...
This Have the system inspected by your autho- usually happens when the steering wheel is rized Mitsubishi Motors dealer or a repair turned only slightly. You can easily return the facility of your choice.
For further information, please contact your conditioning system, 4WD system (if so authorized Mitsubishi Motors dealer. equipped) and S-AWC (if so equipped) to improve fuel efficiency. Refer to Electronically controlled 4WD sys- Front fog light switch (if so tem”...
Wiper and washer switch NOTE Windshield wipers Except for vehicle with rain sensor If the headlights are switched to high beam, The windshield wiper and washer can be the front fog lights will go out; they will illu- NOTE operated with the ignition switch or the oper- minate again when the headlights are ation mode is in ON or ACC.
Page 301
AUTO- Auto-wiper control For further information, please contact your Rain sensor authorized Mitsubishi Motors dealer or a The wipers will automatically repair facility of your choice. On vehicles operate depending on the degree of equipped with the Smartphone Link Display wetness on the windshield.
Page 302
Have the vehicle checked the operation mode is in ON. at an authorized Mitsubishi Motors dealer or • When cleaning the outside surface of the a repair facility of your choice.
Page 303
For further information, please contact your authorized Mitsubishi Motors dealer or a repair facility of your choice. On vehicles equipped with the Smartphone Link Display Audio, screen operations can be used to make the adjustment.
Page 304
Wiper and washer switch Windshield washer NOTE Rear window wiper and washer These functions are not activated when the N00504601400 N00523201463 The windshield washer can be operated with The rear window wiper and washer can be vehicle is shipped from the factory. the ignition switch or the operation mode in To activate or deactivate these functions, operated when the ignition switch or the...
Heat the glass knob in the “INT” position. the pump may fail. with the defroster before using the washer. See your authorized Mitsubishi Motors During cold weather, add a recommended dealer for details. washer solution that will not freeze in the ...
Electric rear window defogger switch When the front wipers have frozen to the CAUTION Electric rear window defog- windshield at the parked positions, turning on ger switch The rear window defogger is not designed to this switch will heat the windshield to make melt snow.
Persons who are unable to feel tempera- For further information, please contact your ture change or skin pain due to age, ill- authorized Mitsubishi Motors dealer. ness, injury, medication, fatigue or other On vehicles equipped with the Smartphone physical conditions or who have sensitive...
Horn switch 2. Open the USB input terminal cover (A) in Horn switch USB input terminal the floor console box. N00523801195 N00566701168 You can connect your USB memory device or Type 1 To honk the horn, press around the “ ”...
Page 309
USB input terminal 4. Connect the USB connector cable (C) to 4. Connect the connector cable (B) to How to connect an iPod the USB input terminal (D). theUSB input terminal (C). N00566901199 1. Park your vehicle in a safe place and turn the ignition switch to the “LOCK”...
Sun visors Vanity mirror Card holder Sun visors N00524601363 A vanity mirror is fitted to the back of the sun Cards can be slipped into the holder (B) on Pull the sun visor downward (1) to reduce visor. the sun visor. front glare while driving.
12 V power outlets Type 1 Type 2 12 V power outlets N00525001683 Accessories can be operated when the igni- Accessories can be operated in all ignition CAUTION tion switch or the operation mode is in ON or switch positions or all operation modes. ACC.
HomeLink® Wireless Control System (if so equipped) ® WARNING HomeLink Wireless Con- trol System During programming, your garage door (if so equipped) or gate may open or close. Make sure that N00554301040 people and objects are clear of the garage door or gate that you are programming.
Page 313
HomeLink® Wireless Control System (if so equipped) 2. Position the end of your hand-held trans- Programming a new Home- NOTE mitter (B) 1 to 3 inches (2 to 8 cm) away ® Link Some devices may require you to replace this ®...
Page 314
HomeLink® Wireless Control System (if so equipped) • If the device does not operate, continue NOTE NOTE ® with “Programming a new HomeLink ” In the event that there are still programming If programming a garage door opener or gate steps 5 to 7 to complete the program- difficulties or questions, additional Home- operator, it is advised to unplug the device...
Page 315
HomeLink® Wireless Control System (if so equipped) 3. Once the door has stopped, press and release the “Learn” or “Smart” button on the garage door opener (refer to your garage door opener owner’s manual for the location of the “Learn” button). Both ®...
Page 316
HomeLink® Wireless Control System (if so equipped) ® ® The HomeLink has the capability of listen- 1. Press and hold the 2 outer HomeLink NOTE ing to these messages at a range up to 820.2 buttons for at least 10 seconds. The indi- ...
Interior lights CAUTION Dome light (front)/Reading Interior lights lights The transmitter has been tested and complies N00525301660 with FCC and IC rules. N00525401531 NOTE Changes or modifications not expressly approved by the party responsible for com- Be aware that leaving the light illuminated Dome light (front) pliance could void the user’s authority to with the engine off may run the battery...
Page 318
Interior lights The doors and the liftgate are closed Reading lights 1- (ON) and the power door lock function is The dome light illuminates regardless of N00537601165 used to lock the doors. any door or the liftgate being opened or Regardless of the dome light switch position, ...
Page 319
Interior lights NOTE Cargo room light Front foot lights When the engine is started using the key N00526101186 N00536901057 The front foot lights (A) come on when the while the doors and liftgate are closed, if you remove the key, the dome light will illumi- front door is opened and go off when the door nate for approximately 30 seconds then go is closed.
The time until the lights auto- when driving. when leaving the vehicle. matically go off can be adjusted. See your authorized Mitsubishi Motors dealer for To open, pull the lever (A). details. For vehicles equipped with the Smartphone Link Display Audio, adjustments can be made using screen operations.
Page 321
Storage spaces Card holder Floor console box NOTE When the lights are illuminated with the N00551601286 To open the console box, lift the release lever There is a card holder on the inside of the light switch in the “ ”, “...
Page 322
Storage spaces The luggage floor board can be folded at the 2. Insert your hand in the gap (B) and fold To access the luggage floor box indicated positions (A). the board as illustrated. (center) 1. Raise the luggage floor board (rear) by pulling up on the strap (D).
Cup holders 7 persons CAUTION Cup holders Do not use for storing objects heavier than N00527301491 typical sunglasses. The cup holder is designed for holding cups There is risk that the holder lid will open or drink-cans securely in its holes. accidentally, resulting in an injury due to falling objects.
Bottle holders For the second row seat For the third row seat Bottle holders N00537001228 N00532401041 N00527301505 This cup holder is located in the second row The cup holder is located at the right side of WARNING seat arm rest. the third row seat.
Cargo area cover (if so equipped) NOTE To use To change position Do not store cup or drink can in the bottle 1. Pull out the spring-loaded cover and insert There are 2 installation holes (B) for the holder. it in the mounting grooves (A) on both cargo area cover.
Page 326
Cargo area cover (if so equipped) 2. After changing the position, gently shake To remove To store (if so equipped) the entire cargo area cover to make sure it is securely retained. 1. Roll back the cargo area cover. The cover can be fitted at the indicated posi- 2.
Assist grips Assist grips Coat hooks Luggage hooks N00559001084 N00553601163 N00528501269 The assist grips (located above the doors on There is a coat hook on the second row seat There are hooks on the sides of the luggage the headliner) are not designed to support assist grip.
Page 330
Driving safety Driving precaution ................6-2 Fuel economy ...................6-2 Driving, alcohol and drugs ..............6-2 Floor mat ..................6-3 Vehicle preparation before driving ..........6-4 Safe driving techniques ..............6-4 Driving during cold weather ............6-5 Braking ....................6-5 Parking .....................6-6 Loading information ................6-6 Cargo loads ..................6-10 Trailer towing ................6-11...
Driving precaution to perform satisfactorily in off-road condi- Keep your tires inflated to the recom- Driving precaution tions. mended pressures. Always drive safely and steer the vehicle When driving a 4-wheel drive vehicle on N00629301092 carefully. Avoid operating the vehicle in a highways or dry improved roads, set the WARNING manner that might require sharp turns or...
Floor mat Similarly, prescription and nonprescription To install the floor mat WARNING drugs affect your alertness, perception and If a floor mat is the wrong size or is not N00628700050 reaction time. Consult with your doctor or 1. Place the floor mat to fit the shape of the properly installed, it can interfere with the pharmacist before driving while under the floorboard.
Tire lem. replacement should, only, be performed by an Similarly, the front passenger seat should authorized Mitsubishi Motors dealer. also be moved as far back as possible. Make sure that infants and small children Lights are properly restrained in accordance with all laws and regulations.
Have the vehicle serviced by an While driving, watch the behavior of injury or death. authorized Mitsubishi Motors dealer or a other drivers, bicyclists, and pedestrians. Always wear protective clothes and a face repair facility of your choice at regular inter- mask when working with your battery, or ...
Parking When parking on a hill, it is important to set When driving in cold weather WARNING the parking brake before moving the selector Do not park your vehicle in areas where lever to the “P” (PARK) position. This pre- combustible materials such as dry grass or On snowy roads, ice can form on the braking vents loading the parking brake against the...
Page 336
Loading information installed options, and the tongue weight of Curb weight: the weight of a motor vehi- *:150 lbs (68 kg) is the weight of one per- the trailer, if any, being towed. The tire and cle with standard equipment including the son as defined by U.S.A.
Page 337
Loading information Determine the combined weight placard also tells you the size and recom- Steps for Determining Correct mended inflation pressure for the original of luggage and cargo being loaded Load Limit equipment tires on your vehicle. For more on the vehicle. That weight may information, refer to “Tires”...
Page 338
Loading information NOTE The following table shows examples on how to calculate total load, cargo/luggage and towing capacities of your vehicle with varying seating configura- tions and number and size of occupants. This table is for illustration purposes only and may not be accurate for the seating and load carry capacity of your vehicle.
Cargo loads WARNING WARNING Cargo loads To reduce the risk of serious injury or Make sure that the weight of luggage and N00629700435 death, the combined weights of the driver, the roof carrier do not exceed the maxi- passengers and cargo and must never mum roof load, 110 lb (50 kg).
Trailer towing CAUTION Trailer towing Before driving and after traveling a short dis- N00629801361 tance, always check the load to make sure it Towing a trailer will adversely affect your is securely fastened to the roof carrier. vehicle’s handling, performance, braking, Stop the vehicle periodically and check that durability and driving economy (fuel con- the load remains secure.
Page 341
Trailer towing Weight limits Maximum trailer weight Tongue weight The tongue weight of any trailer is important Never exceed the vehicle capacity weight, Recommendations for towing up to this limit because it affects the vehicle capacity weight. maximum trailer weight (A), maximum are as follows.
Page 342
NOTE Maintenance when trailer tow- tribution of the load in the trailer. This can be Mitsubishi Motors recommends that sway checked by separately weighing the loaded control be used whenever you are towing, to trailer and then the tongue.
Page 343
Trailer towing yourself with the feel of handling and braking Trailer lights Operating hints with the added weight of the trailer. Always keep in mind that the vehicle you are driving Trailer lights and equipment must comply is now a good deal longer and not nearly as WARNING with federal, state, and local regulations.
Page 344
Trailer towing Avoid jerky or sudden maneuvers. Signal If the engine coolant temperature indica- Passing well in advance. flashes on the information screen in the multi-information display or the You’ll need more passing distance up ahead Overheating engine power drops suddenly, refer to when you’re towing a trailer.
Page 345
Trailer towing 1. Apply the brakes and keep them applied. 2. Have someone place chocks or blocks under both the vehicle and trailer wheels. 3. When the chocks or blocks are in place, release your brakes slowly until the chocks or blocks absorb the load. 4.
Comfort controls Vents ....................7-2 Dual-zone automatic climate control air conditioner ......7-5 Important air conditioning operating tips ........7-13 Air purifier ..................7-14 General information about your radio ...........7-14...
Vents Air flow and direction adjust- Passenger’s vents Vents ments N00729901288 Move the knob (A) to make adjustments. N00730201340 To close the vent, fully move the knob (A) to the left side. Driver’s vents Move the knob (A) to make adjustments. To close the vent, fully move the knob (A) to the outer side.
Page 348
“ ” posi- tion. For further information, we recommend you to consult an authorized Mitsubishi Motors dealer or a repair facility of your choice. On vehicles equipped with the Smartphone Link Display Audio, screen operations can be used to make the adjustment.
Page 349
“ ” position. For further information, we recommend you to consult an authorized Mitsubishi Motors dealer or a repair facility of your choice. On vehicles equipped with the Smartphone Link Display Audio, screen operations can be used to make the adjustment.
Dual-zone automatic climate control air conditioner Dual-zone automatic climate control air conditioner N00731501412 The air conditioner can only be used while the engine is running. CAUTION The engine speed may increase when the air conditioner is operating. With an increased engine speed, an A/T or CVT vehicle will creep to a greater degree than with a lower engine speed. Fully depress the brake pedal to pre- vent the vehicle from creeping.
Page 351
Dual-zone automatic climate control air conditioner 9- Electric rear window defogger switch NOTE Blower speed selection switch P.5-225 Since the air conditioning operation is con- N00736901206 10- OFF switch trolled while the ECO mode is operating, Press of the blower speed selection 11- Driver’s side temperature display you may feel that effectiveness of the air switch to increase the blower speed.
Page 352
Temperature control switch NOTE sonal preferences. When the engine coolant temperature is low, N00737001448 Contact your Mitsubishi Motors dealer or a Press of the temperature control the air temperature from the heater will be repair facility of your choice for assistance.
Page 353
Dual-zone automatic climate control air conditioner Synchronized mode Mode switch Defogger switch If the driver’s side temperature control N00737101234 N00703401054 switch is pressed, the passenger’s side To change the amount of air flowing from the When this switch is pressed, the mode temperature will also be controlled to the vents, press the MODE switch.
Page 354
Dual-zone automatic climate control air conditioner NOTE NOTE When the defogger switch is pressed, the air When the engine coolant temperature rises to conditioning system automatically operates a certain level, the air selection is automati- and outside air (as opposed to recirculated cally switched to the recirculation position air) is selected.
Page 355
If it does blink, have it checked at approximately 10 seconds or longer. in order to prevent windows from fogging an authorized Mitsubishi Motors dealer or a When the setting has changed, the system repair facility of your choice.
Page 356
Dual-zone automatic climate control air conditioner On vehicles equipped with the Smart- AUTO switch OFF switch phone Link Display Audio, screen opera- N00703501042 N00703601027 tions can also be used to change the When the AUTO switch is pressed, the indi- Push the switch to turn off the air condition- setting.
Page 357
Dual-zone automatic climate control air conditioner Operating the air conditioning NOTE Defrosting or defogging (wind- shield, door windows) system (automatic mode) Set the temperature at about 75 (when the outside temperature unit of the multi-infor- N00732401564 N00731701443 mation display shows °F) or 24 (when the CAUTION outside temperature unit of the multi-infor- mation display shows °C) under normal con-...
Important air conditioning usual, the cause might be a refrigerant leak. operating tips Have the system inspected by your authorized Mitsubishi Motors dealer or a repair facility N00733701362 1. Park the vehicle in the shade whenever of your choice. possible. Parking in the hot sun makes the vehicle interior extremely hot which then requires more time to cool.
Contact your Mitsubishi Motors dealer or a HFC-134a. repair facility of your choice for assistance. During a long period of disuse...
Page 360
General information about your radio Signal transmission Reflection Cross modulation FM signals do not follow the earth surface The reason why one can hear FM but not AM If one listens to a weak station and is in the nor are they reflected by the upper atmo- in parking garages, under bridges etc., is that vicinity of another strong station, both sta- sphere.
Page 361
General information about your radio Causes of disturbances FM reception is affected by the electrical sys- tems of vehicles in the vicinity, especially those without an electronic noise suppression device. The disturbance is even greater if the station is weak or poorly tuned. FM reception is not as sensitive to electrical disturbances as AM.
For emergencies If the vehicle breaks down ...............8-2 Jump-starting the engine ..............8-2 Engine overheating ................8-4 Jack and tools ...................8-5 How to change a tire ................8-6 Towing ...................8-14 Operation under adverse driving conditions ........8-15 Fuel Pump Shut-off System ............8-16...
If the vehicle breaks down CAUTION If the vehicle breaks down Jump-starting the engine Check the other vehicle. It must have a 12- N00836301230 N00836401778 volt battery. If the other system isn’t 12-volt, If your vehicle breaks down on the road, If the engine cannot be started because the both systems can be damaged.
Page 364
Jump-starting the engine 3.0 liter models 8. Connect one end of the other jumper cable WARNING to the negative (-) terminal of the If the electrolyte fluid is not visible, or booster battery (B), and then connect the looks frozen, DO NOT ATTEMPT JUMP other end to the designated ground STARTING!!
This can cause the anti-lock braking system external battery charger. Mitsubishi Motors dealer or a repair facil- warning light to blink on and off. This is only Keep sparks, cigarettes, and flames away ity of your choice for assistance.
You can start driving again when the high coolant temperature warning does not come on. 11. Have the system inspected by your autho- rized Mitsubishi Motors dealer or a repair facility of your choice. For emergencies...
How to change a tire Tools How to change a tire N00836901829 Before changing a tire, first stop your vehicle in a safe, flat location. To retract 1. Park the vehicle on level and stable ground. 2. Set the parking brake firmly. 3.
Page 368
How to change a tire Spare tire information CAUTION Driving with an improperly inflated tire can N00849600315 cause an accident. If you have no choice but Compact spare tire to drive with an under-inflated tire, keep your speed down and avoid sudden steering or braking, if possible.
Page 369
How to change a tire CAUTION CAUTION Do not use tire chains with your compact When hooking or unhooking the tire hanger, spare tire. Using a chain could cause damage be sure to hold the tire hanger firmly to pre- to your vehicle and loss of the chains.
Page 370
How to change a tire 3. Rotate the jack by hand until the flange WARNING WARNING portion (B) fits in the groove (C) at the top Set the jack only at the positions shown Stop jacking up the vehicle as soon as the of the jack.
Page 371
How to change a tire 5. Remove the wheel nuts with the wheel nut wrench, then take the wheel off. Type 1 CAUTION Handle the wheel carefully when changing the tire, to avoid scratching the wheel sur- Type 2 face.
Page 372
How to change a tire NOTE If all 4 aluminum wheels are changed to steel wheels, use tapered nuts. 8. Lower the vehicle slowly until the tire touches the ground, by rotating the wheel nut wrench counterclockwise. CAUTION CAUTION ...
Page 373
How to change a tire 4. Install the cover over the tire hanger To store the spare tire CAUTION mounting bolt. Make sure you hook the tire hanger in the N00832300020 1. Place the tire on the center of the tire proper position.
Page 374
How to change a tire Wheel cover (if so equipped) CAUTION Trying to remove the wheel cover with only N00849401235 your bare hands can seriously injure your To remove fingers. Wrap the tip of the bar with a cloth, insert it To install into the notch provided in the wheel cover, and pry the cover away from the wheel.
Towing NOTE Towing the vehicle by a tow truck Your vehicle cannot tow any other vehicle. There may be local regulations concerning CAUTION towing in your area. This vehicle must not be towed by a tow Obey the regulations of the area where you truck using sling lift type equipment (Type are driving your vehicle.
Operation under adverse driving conditions CAUTION On wet roads Operation under adverse [For front-wheel drive vehicle equipped with driving conditions the active stability control (ASC)] CAUTION N00837201760 If the vehicle is towed with the ignition switch in the “ON” position or the operation ...
Do not drive with an extremely low fuel immediately take your vehicle to an level. Running out of gas could damage authorized Mitsubishi Motors dealer or a the catalytic converter. repair facility of your choice for service. Vehicle care and maintenance...
Page 381
Engine hood Release the lever and lift the engine hood. CAUTION CAUTION Always insert the support prop into the hole Make sure the engine hood is firmly closed specially made for it. Propping the engine before driving. hood at any other place could cause the prop If you drive without the engine hood com- to slip out and lead to an accident.
Engine oil and oil filter To check the oil level, remove the dipstick, Engine oil and oil filter 3.0 L models wipe it off, and gently reinsert it all the way. Slowly pull the dipstick straight out and N00937702024 check the oil level by checking the upper sur- To check and refill engine oil face of the dipstick.
Page 384
If you cannot find oils with the ILSAC certi- MAINTENANCE MANUAL”. fication symbol, use an API classification SN Only use high quality replacement filters on oil with the following label. this vehicle. The manufacturer’s specifica- tions for Mitsubishi Motors Genuine oil fil- Vehicle care and maintenance...
Do not overfill the reserve tank. (A), then remove the Air duct (B). your authorized Mitsubishi Motors dealer or Your vehicle uses a special radiator cap service station can check it for you.
Page 387
2.4 L models NOTE Mitsubishi Motors Genuine Parts are recom- mended when replacing the air cleaner filter. For 2.4 L models, make sure that the connec- tor is properly reconnected.
(CVT) should be maintained and serviced by ing temperature. Driving with the wrong fluid Transaxle fluid is extremely flammable an authorized Mitsubishi Motors dealer or a level will rapidly wear out the transaxle and and poisonous. Do not spill fluid when repair facility of your choice to obtain the destroy the fluid.
Special additives Fill with the oil according to the table below. Do not use any fluid additives to the trans- Fluid type mission. EMPTY Transfer oil (All-wheel drive Mitsubishi Motors Genuine FULL Lubricant Super Hypoid Gear Oil API models) GL-5 N00938401311...
WARNING battery and charging system tested by an Take care in handling brake fluid as it is authorized Mitsubishi Motors dealer or a harmful to the eyes, may irritates your repair facility of your choice. skin and will damage painted surfaces.
Page 391
Open doors and windows in any closed rized Mitsubishi Motors dealer or a repair space where you may be charging or facility of your choice before the start of cold working with the battery.
Tires • The outward facing sidewall of an asym- NOTE WARNING metrical tire that has a particular side Check each battery terminal for corrosion. Tires, including spare tire, degrade over that must always face outward when You can prevent further corrosion by wash- time with age even when they are not mounted on a vehicle.
Page 393
Tires Ply: a layer of rubber-coated parallel 6- Treadwear, Traction and Tem- NOTE cords. perature Grades European/Japanese metric tire Cord: the strands forming the plies in the sizing is based on European/Jap- tire. Size Designation Rim: a metal support for a tire or a tire anese design standards.
Page 394
Tires Speed symbol NOTE WARNING A symbol indicating the Temporary spare tires are high Overloading of your tire is range of speeds at which a pressure compact spares dangerous. Overloading can tire can carry a load corre- designed for temporary emer- cause tire failure, affect vehi- sponding to its load index gency use only.
Page 395
Tires EXAMPLE: DOT MA L9 ABCD under controlled conditions on speci- Treadwear, Traction and Temper- 1504 fied government test surfaces of ature Grades Department of Transporta- asphalt and concrete. A tire marked tion C may have poor traction perfor- Treadwear This symbol certifies that mance.
Page 396
Tires The tire pressure for your vehicle under nor- to 41 kPa) from the cold inflation pressure. Tire inflation pressures mal driving conditions is listed on the placard Do not let air out of the tires to get back to the N00939301997 attached to the driver’s door sill.
Page 397
Mitsubishi Motors Gen- 1- Location of the tread wear indicator sonal driving habits. Any time you notice uine wheels.
Page 398
In some areas of the country, snow tires are Check with an authorized Mitsubishi Motors and rear tires on the left-hand side of the required for winter driving. If snow tires are...
Brake pedal free play If the free play is not within these limits, take Tire chains WARNING your vehicle to an authorized Mitsubishi Continued operation of the vehicle with N00940101139 Motors dealer or a repair facility of your the parking brake lever out of adjustment choice for adjustment.
Have the valve clearance checked at an maintained by an authorized Mitsubishi N00940900231 authorized Mitsubishi Motors dealer at the Motors dealer or a repair facility of your Spark plugs must fire properly to ensure mileage specified in the “WARRANTY AND choice.
Have the system checked at an authorized for: the engine exhaust system properly serviced. Mitsubishi Motors dealer at the mileage spec- Have a competent mechanic inspect the com- ified in the “WARRANTY AND MAINTE- Severe surface cracking, scuffing or worn plete exhaust system and nearby body areas NANCE MANUAL”.
UAL”. In case of a melted fusible link, see your authorized Mitsubishi Motors dealer or a repair facility of your choice for inspection and replacement. For the fusible links, please refer to “Fuse load capacities”...
Fuses WARNING Passenger compartment Engine compartment Fusible links must not be replaced by any The fuse blocks in the passenger compart- In the engine compartment, the fuse blocks other device. Failing to fit the correct fus- ment are located behind the fuse lid in front are located as shown in the illustration.
Page 404
Fuses Fuse load capacities N00954801430 This fuse list shows the names of the electrical systems and their fuse capacities. There are spare fuses in the main fuse block cover in the engine compartment. Always replace a blown fuse with one of the same capacity as the original.
Page 405
Fuses Sym- Capac Sym- Capac Engine compartment fuse location Electrical system Electrical system table Cigarette lighter/ 12 V power outlet 15 A 15 A 12 V power outlet Main fuse block Rear window wiper 15 A Charge 7.5 A Sunroof 20 A Heated steering 15 A...
Page 406
Fuses Sym- Electrical sys- Capaci Sym- Electrical sys- Capaci Sym- Electrical sys- Capaci Head- SBF2 Starter 30 A* Front fog lights 15 A light Air condition- Air conditioner 10 A (low 20 A SBF3 ing condenser 30 A* beam) Headlight fan motor 20 A (left)
Page 407
Fuses Some fuses may not be installed on your The fuse block does not contain spare 7.5 A, Fuse replacement vehicle, depending on the vehicle model 25 A or 30 A fuses. If one of these fuses N00954901141 or specifications. burns out, substitute with the following fuse.
If the glass surface is dirty, clean it with checked by an authorized Mitsubishi Motors alcohol and let it dry completely before dealer or a repair facility of your choice to 4. Use the fuse location diagrams and the installing the bulb.
Page 409
Front Bulb these procedures be carried out by an autho- type rized Mitsubishi Motors dealer or a repair facility of your choice. 1 - Front turn signal light 21 W PY21W Be careful not to scratch the vehicle body 9005 when removing a light and lens.
Page 410
Replacement of light bulbs NOTE ANSI Inside trade No. • Headlight, low beam (LED type) Item Wattage N00950401731 or Bulb • Parking light type • Daytime running light 6 - Rear turn sig- 21 W WY21W • Front fog light (LED type) nal light •...
Page 411
N00900301171 NOTE The headlights use an LED instead of the bulb. Check with an authorized Mitsubishi Motors *- Front of the vehicle dealer or a repair facility of your choice when the light needs to be repaired or replaced.
Page 412
2. Turn the cap (B) counterclockwise to remove it. N00943201359 The alignment of the headlights should be checked by an authorized Mitsubishi Motors dealer or a repair facility of your choice. Front side-marker lights *- Front of the vehicle N00915501214 1.
Page 413
The side turn signal lights use an LED lights use an LED instead of the bulb. instead of the bulb. Check with an authorized Mitsubishi Motors Check with an authorized Mitsubishi Motors dealer or a repair facility of your choice...
Page 414
(E). N00943601933 NOTE The fog lights use an LED instead of the bulb. Check with an authorized Mitsubishi Motors dealer or a repair facility of your choice when the light needs to be repaired or replaced. Rear combination lights 4.
Page 415
LED instead of the bulb. Check with an authorized Mitsubishi Motors dealer or a repair facility of your choice when the light needs to be repaired or replaced.
The high-mounted stop light uses an LED instead of the bulb. Check with an authorized Mitsubishi Motors dealer or a repair facility of your choice when the light needs to be repaired or replaced.
Cleaning the inside of your vehicle CAUTION CAUTION NOTE Cleaning products can be dangerous. Some Do not use organic substances (solvents, Do not use cleaners, conditioners, and pro- are poisonous and others are highly flamma- benzine, kerosene, alcohol, gasoline, etc.) or tectants containing silicones or wax.
Cleaning the outside of your vehicle NOTE NOTE Washing If fuzzing is difficult to remove from the seat The genuine leather surface may harden and N00945901709 upholstery, draw a suitable defuzzing brush shrink if it is exposed to the direct sunlight Chemicals contained in the dirt and dust over the surface in one direction.
Page 419
Cleaning the outside of your vehicle CAUTION CAUTION Waxing Never spray or splash water on the electrical • If your vehicle is equipped with the rain N00946000205 parts in the engine compartment. This may sensor, place the wiper switch lever in the Wax your vehicle once or twice a year, or damage them.
Page 420
Cleaning the outside of your vehicle information code plate located on the front CAUTION Chrome parts passenger door sill. On vehicles with sunroof, be careful not to N00946400052 apply any wax on the weatherstrip (black To prevent spots and corrosion of chrome Cleaning plastic parts rubber) when waxing the area around the parts, wash with water, dry thoroughly, and...
Page 421
Cleaning the outside of your vehicle Window glass NOTE The surface treatment on the inside of the N00946600054 glass may be removed if a hard cloth or The window glass can usually be cleaned organic solvent is used. using only a sponge and water. Glass cleaner can be used to remove wax, oil, grease, dead insects, etc.
Customer assistance/ Reporting Safety Defects Consumer information (For vehicles sold in U.S.A.) ....10-2 Reporting Safety Defects ...............10-2 Important facts to know in case of an accident ......10-4...
Page 423
Administration (NHTSA) in addi- ) times as well on the government course heat when tested under controlled conditions tion to notifying Mitsubishi Motors as a tire graded 100. The relative performance on a specified indoor laboratory test wheel. Corporation.
Page 424
Canada, Inc. call 1-888-576-4878 or and if it finds that a safety defect write to: To contact Mitsubishi Motors North exists in a group of vehicles, it may America, Inc. call 1-888-648-7820 or Mitsubishi Motor Sales of Can- order a recall and remedy campaign.
Important facts to know in case of an accident call (671)649-3673 or write to: Ask for genuine Mitsubishi Motors parts. Important facts to know in Many times, to save money, your insur- case of an accident ance company will recommend imitation Triple J Enterprises, Inc.
Page 426
Genuine Mitsubishi Motors replacements parts are your guarantee that your vehicle will have all the technological advantages and maintain the style and protec- tion of a brand new Mitsubishi Motors. Customer assistance/Reporting Safety Defects 10-5...
Vehicle labeling The air conditioning label is affixed on the Chassis number Vehicle labeling inside panel of the engine hood. N01147401866 The chassis number is stamped on the bulk- Keep a record of the chassis number and head as shown in the illustration. vehicle identification number.
Page 430
Vehicle labeling Type 2 Engine model/serial number Tire and loading information placard The engine model and serial number are N01148101613 stamped on the cylinder block as shown in The tire and loading information placard is the illustrations. located on the driver’s door sill. 2.4 liter models Certification label N01148201249...
1.5 in (38 mm) PCD: Pitch Circle Diameter (installation holes) NOTE Contact an authorized Mitsubishi Motors dealer for details on the combination used on your vehicle. These tires satisfy vehicle loading conditions described in this owner’s manual. Capacity...
Page 435
Capacity Item Capacity Lubricants Vehicles without S-AWC .50 qt (0.47 L) Mitsubishi Motors Genuine Super Hypoid Gear Oil API GL-5 Transfer oil SAE 80 Vehicles with S-AWC .48 qt (0.45 L) Mitsubishi Motors Genuine Super Hypoid Gear Oil API GL-5...
Alphabetical index Selector lever positions ....5-71 Warning lights and buzzer ..... 5-203 Numerics Sports mode........5-72 Break-in recommendations ....5-3 12 V power outlets......5-230 Bulb capacity........9-32 4-wheel drive operation ....... 5-88 Back-up light Bulb capacity ......... 9-32 California Perchlorate Materials Replacement ........
Page 437
Alphabetical index Fluid ........9-11, 11-7 Dual-zone automatic climate control air Floor mat ..........6-3 Selector lever operation....5-75 conditioner ........7-5 Fluid Selector lever positions ....5-79 Automatic transaxle fluid ..9-11, 11-7 Sports mode ........5-80 Brake fluid......9-13, 11-7 Coolant (engine) ......
Page 438
Alphabetical index Fuel hoses ........9-23 High beam indicator ......5-202 Fuel selection ........3-2 High-mounted stop light Tank capacity ......... 11-7 Bulb capacity ......... 9-32 Keyless entry system....5-7, 5-30 Fuel Pump Shut-off System ....8-16 Hill start assist ........5-95 Keys ............
Page 439
Alphabetical index Seat belt..........4-18 Adjustable seat belt shoulder anchor. 4-24 Child restraint systems ....4-27 Octane number ........3-2 Radiator cap ........9-9 Front passenger seat belt warning light ..Radio 4-23 Engine oil ........11-7 General information about your radio 7-14 Maintenance and inspection.....
Page 440
Alphabetical index 5-57 Size (tire and wheel) ....... 11-7 Vehicle labeling........11-2 Wheel lock......5-24, 5-65 Snow tires ........9-21 Vehicle preparation before driving..6-4 Tire and loading information placard 11-3 Stop lights Vehicle weights ........11-5 Tire chains........9-22 Bulb capacity .........
Page 441
How to calculate your gasoline mileage...
Need help?
Do you have a question about the Outlander 2018 and is the answer not in the manual?
Questions and answers