Mitsubishi MOTORS Outlander 2019 Owner's Manual page 279

Indicator light, warning light, and information screen display list (multi information display - Type 1)
Screen
 The Blind Spot Warning (BSW) sensor is temporar-
ily not available for some reason such as the environ-
mental condition or increase of the sensor
temperature.
 The Blind Spot Warning (BSW) does not operate
normally because there are some malfunctions in the
sensor or the system.
 Foreign objects, such as dirt, snow or ice, adhere to
the bumper surface around the sensor.
 The Rear Cross Traffic Alert (RCTA) is detected the
vehicle approaching your vehicle.
 There is a fault in the sensor.
Cause Do this (Reference)
 When the warning display does not disappear after
waiting for a while, contact an authorized Mitsubishi
Motors dealer.
Refer to "Blind Spot Warning (BSW): When the sen-
sor is temporarily not available" on page 5-129.
 Immediately have your vehicle inspected at an
authorized Mitsubishi Motors dealer.
Refer to "Blind Spot Warning (BSW): When there is
a malfunction in the system or the sensor" on page
5-129.
 Remove a foreign object on the bumper surface
around the sensor.
When the warning display does not disappear after
having cleaned the bumper surface around the sen-
sor, contact an authorized Mitsubishi Motors dealer.
Refer to "Blind Spot Warning (BSW): When there is
a foreign objects on the sensor" on page 5-130.
 Pay special attention to the rear of your vehicle.
Refer to "Rear Cross Traffic Alert (RCTA)" on page
5-132.
 Contact an authorized Mitsubishi Motors dealer.
Refer to "Forward Collision Mitigation System
(FCM): When a problem is detected" on page 5-122.
Refer to "Lane Departure Warning System (LDW):
System problem warning" on page 5-138.
Refer to "Automatic high beam system: System
problem warning" on page 5-216.
Features and controls
5
5-197