H3C S6812 Series Command Reference Manual page 577

Usage guidelines
If you do not specify any keywords or arguments, the command displays all local LLDP information,
which includes the following:
•
The global LLDP information.
•
The LLDP information about the LLDP-enabled ports in up state.
Examples
# Display all local LLDP information.
<Sysname> display lldp local-information
Global LLDP local-information:
Chassis ID
System name
System description
System capabilities supported
System capabilities enabled
MED information:
Device class
MED inventory information of master board:
HardwareRev
FirmwareRev
SoftwareRev
SerialNum
Manufacturer name
Model name
Asset tracking identifier
LLDP local-information of port 52[Ten-GigabitEthernet1/0/3]:
Port ID type
Port ID
Port description
LLDP agent nearest-bridge management address:
Management address type
Management address
Management address interface type : IfIndex
Management address interface ID
Management address OID
LLDP agent nearest-nontpmr management address:
Management address type
Management address
Management address interface type : IfIndex
Management address interface ID
Management address OID
LLDP agent nearest-customer management address:
Management address type
Management address
Management address interface type : IfIndex
Management address interface ID
Management address OID
Port VLAN ID(PVID): 1
: 00e0-fc00-5600
: Sysname
: H3C Comware Platform Software
: Bridge, Router, Customer Bridge, Service Bridge
: Bridge, Router, Service Bridge
: Connectivity device
: REV.A
: 109
: 7.1.070 Test 5101
: NONE
: H3C
: H3C S5150-24S-PWR-EI
: Unknown
: Interface name
: Ten-GigabitEthernet1/0/3
: Ten-GigabitEthernet1/0/3 Interface
: IPv4
: 192.168.80.60
: Unknown
: 0
: IPv4
: 192.168.80.61
: Unknown
: 0
: IPv4
: 192.168.80.62
: Unknown
: 0
2