Ascii; Binary - H3C S6812 Series Command Reference Manual

150 Accepted data connection
226 File successfully transferred
1657 bytes sent in 0.000736 seconds (2.15 Mbyte/s)

ascii

Use ascii to set the file transfer mode to ASCII.
Syntax
ascii
Default
The file transfer mode is binary.
Views
FTP client view
Predefined user roles
network-admin
Usage guidelines
You can perform this operation only after you log in to the FTP server.
FTP transfers files in either of the following modes:
•
Binary mode—Transfers non-text files.
•
ASCII mode—Transfers text files.
When the device acts as the FTP server, the transfer mode is determined by the FTP client. When
the device acts as the FTP client, you can set the transfer mode. The transfer mode is binary by
default.
Examples
# Set the file transfer mode to ASCII.
ftp> ascii
200 TYPE is now ASCII
Related commands

binary

binary
Use binary to set the file transfer mode to binary, which is also called the flow mode.
Syntax
binary
Default
The file transfer mode is binary.
Views
FTP client view
Predefined user roles
network-admin
9