Qinq Transparent-Vlan - H3C S6812 Series Command Reference Manual

Views
System view
Predefined user roles
network-admin
Parameters
customer-tag: Sets the TPID value in the CVLAN tag.
hex-value: Sets a hexadecimal TPID value in the range of 1 to ffff, excluding the reserved EtherType
values listed in
Table 2 Reserved EtherType values
Protocol type
ARP
PUP
RARP
IP
IPv6
PPPoE
MPLS
IPX/SPX
IS-IS
LACP
LLDP
802.1X
802.1ag
Cluster
Reserved
Usage guidelines
A QinQ-enabled port uses the CVLAN TPID to match incoming tagged frames. An incoming frame is
handled as untagged if its TPID is different from the CVLAN TPID.
Examples
# Set the TPID value in CVLAN tags to 8200 (hexadecimal).
<Sysname> system-view
[Sysname] qinq ethernet-type customer-tag 8200
Related commands
qinq ethernet-type (interface view)

qinq transparent-vlan

Use qinq transparent-vlan to enable transparent transmission for a list of VLANs on a port.
Use undo qinq transparent-vlan to disable transparent transmission for a list of VLANs on a port.
Table 2.
Value
0x0806
0x0200
0x8035
0x0800
0x86dd
0x8863/0x8864
0x8847/0x8848
0x8137
0x8000
0x8809
0x88cc
0x888e
0x8902
0x88a7
0xfffd/0xfffe/0xffff
4