Lldp Notification Remote-Change Enable; Lldp Timer Fast-Interval - H3C S6812 Series Command Reference Manual

lldp notification remote-change enable

Use lldp notification remote-change enable to enable LLDP trapping.
Use undo lldp notification remote-change enable to disable LLDP trapping.
Syntax
In Layer 2 Ethernet view or management Ethernet interface view:
lldp [ agent { nearest-customer | nearest-nontpmr } ] notification remote-change enable
undo lldp [ agent { nearest-customer | nearest-nontpmr } ] notification remote-change enable
In Layer 2 aggregate interface view:
lldp agent { nearest-customer | nearest-nontpmr } notification remote-change enable
undo lldp agent { nearest-customer | nearest-nontpmr } notification remote-change enable
Default
LLDP trapping is disabled.
Views
Layer 2 Ethernet interface view
Management Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
agent: Specifies an LLDP agent type. If you do not specify an agent type in Ethernet or management
Ethernet interface view, the command enables LLDP trapping for nearest bridge agents.
nearest-customer: Specifies nearest customer bridge agents.
nearest-nontpmr: Specifies nearest non-TPMR bridge agents.
Examples
# Enable LLDP trapping for the nearest customer bridge agent on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface Ten-GigabitEthernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] lldp agent nearest-customer notification
remote-change enable

lldp timer fast-interval

Use lldp timer fast-interval to set an interval for fast LLDP frame transmission.
Use undo lldp timer fast-interval to restore the default.
Syntax
lldp timer fast-interval interval
undo lldp timer fast-interval
Default
The interval for fast LLDP frame transmission is 1 second.
31