Shutdown; Speed - H3C S6812 Series Command Reference Manual

Examples
# Clear dropped packet statistics for Ten-GigabitEthernet 1/0/1.
<Sysname> reset packet-drop interface ten-gigabitethernet 1/0/1
# Clear dropped packet statistics for all interfaces.
<Sysname> reset packet-drop interface
Related commands
display packet-drop

shutdown

Use shutdown to shut down an Ethernet interface.
Use undo shutdown to bring up an Ethernet interface.
Syntax
shutdown
undo shutdown
Default
Ethernet interfaces are in up state.
Views
Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
Some interface configurations might require an interface restart before taking effect.
The shutdown and loopback commands are mutually exclusive.
Examples
# Shut down and then bring up Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] shutdown
[Sysname-Ten-GigabitEthernet1/0/1] undo shutdown

speed

Use speed to set the speed of an Ethernet interface.
Use undo speed to restore the default.
Syntax
speed { 100 | 1000 | 2500 | 5000 | 10000 | auto }
undo speed
Default
An Ethernet interface negotiates a speed with its peer.
28