Vlan Policy Deny - H3C S6812 Series Command Reference Manual

Hide thumbs Also See for S6812 Series:
Table of Contents

Advertisement

Views
System view
Predefined user roles
network-admin
Parameters
role role-name: Specifies a user role, a case-sensitive string of 1 to 63 characters. The user role
must exist in the system and cannot be security-audit. If you do not specify a user role, the command
sets a password for the default target user role which is set by using the super default role
command.
hash: Specifies a password in hashed form.
simple: Specifies a password in plaintext form. For security purposes, the password specified in
plaintext form will be stored in hashed form.
string: Specifies the password.
In non-FIPS mode, the plaintext form of the password is a case-sensitive string of 1 to 63
characters. The hashed form of the password is a case-sensitive string of 1 to 110 characters.
In FIPS mode, the password must be a case-sensitive plaintext string of 15 to 63 characters.
The string must contain four character types including digits, uppercase letters, lowercase
letters, and special characters.
Usage guidelines
If you do not specify any parameters, you specify a plaintext password in the interactive mode.
The FIPS mode supports only the interactive mode for setting a password.
Set a password if you configure local password authentication for temporary user role authorization.
It is a good practice to specify different passwords for different user roles.
Examples
# Set the password to 123456TESTplat&! in plaintext form for user role network-operator.
<Sysname> system-view
[Sysname] super password role network-operator simple 123456TESTplat&!
# Set the password to 123456TESTplat&! in the interactive mode for user role network-operator.
<Sysname> system-view
[Sysname] super password role network-operator
Password:
Confirm :
Updating user information. Please wait... ...
Related commands
super authentication-mode
super default role

vlan policy deny

Use vlan policy deny to enter user role VLAN policy view.
Use undo vlan policy deny to restore the default.
Syntax
vlan policy deny
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

S6813 seriesS5150-ei

Table of Contents