H3C S6812 Series Command Reference Manual page 2

Command reference
Layer 3—IP Routing Command
Reference
IP Multicast Command
Reference
ACL and QoS Command
Reference
Security Command Reference
Content
•
Basic IP forwarding.
•
IDRP.
•
IP performance optimization.
•
UDP helper.
•
IPv6 basics.
•
DHCPv6.
Covers the commands for configuring routes for IPv4 and IPv6 networks
of different sizes, route filtering, route control, and policy-based routing.
This command reference includes:
•
Basic IP routing.
•
Static routing.
•
RIP.
•
OSPF.
•
Policy-based routing.
•
IPv6 static routing.
•
RIPng.
•
OSPFv3.
•
IPv6 policy-based routing.
•
Routing policy.
Covers the commands for Layer 2 IPv4 multicast protocols (including
IGMP snooping, PIM snooping, and multicast VLAN) and Layer 2 IPv6
multicast protocols (including MLD snooping, IPv6 PIM snooping, and
IPv6 multicast VLAN).
This command reference includes:
•
IGMP snooping.
•
PIM snooping.
•
Multicast VLAN.
•
MLD snooping.
•
IPv6 PIM snooping.
•
IPv6 multicast VLAN.
Covers the commands for classifying traffic with ACLs, and allocating
network resources and managing congestions with QoS technologies to
improve network performance and network use efficiency.
This command reference includes:
•
ACL.
•
QoS (including QoS policy, priority mapping, GTS and rate limit,
congestion management, congestion avoidance, and aggregate
CAR).
•
Time range.
•
Data buffer.
Covers security feature commands. Available security features include
identity authentication (AAA), access security (802.1X, MAC
authentication, and portal), secure management (SSH), SSL, and attack
protection (IP source guard, ARP attack protection, and MFF).
This command reference includes:
•
AAA.
•
802.1X.
•
MAC authentication.
•
Portal.
•
Port security.
•
User profile.