H3C S6812 Series Command Reference Manual page 591

display lldp status
Use display lldp status to display LLDP status.
Syntax
display lldp status [ interface interface-type interface-number ] [ agent { nearest-bridge |
nearest-customer | nearest-nontpmr } ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies a port by its type and number. If you do not
specify this option, the command displays the global LLDP status and the LLDP status of all ports.
agent: Specifies an LLDP agent type. If you do not specify an agent type, the command displays the
status information for all LLDP agents.
nearest-bridge: Specifies nearest bridge agents.
nearest-customer: Specifies nearest customer bridge agents.
nearest-nontpmr: Specifies nearest non-TPMR bridge agents.
Examples
# Display the global LLDP status and the LLDP status of each port.
<Sysname> display lldp status
Global status of LLDP: Enable
Bridge mode of LLDP: customer-bridge
The current number of LLDP neighbors: 5
The current number of CDP neighbors: 0
LLDP neighbor information last changed time: 0 days, 0 hours, 4 minutes, 40 seconds
Transmit interval
Fast transmit interval
Transmit max credit
Hold multiplier
Reinit delay
Trap interval
Fast start times
LLDP status information of port 1 [Ten-GigabitEthernet1/0/1]:
LLDP agent
Port status of LLDP
Admin status
Trap flag
MED trap flag
Polling interval
Number of LLDP neighbors
Number of MED neighbors
Number of CDP neighbors
nearest-bridge:
: 30s
: 1s
: 5
: 4
: 2s
: 5s
: 3
: Enable
: TX_RX
: No
: No
: 0s
: 5
: 2
: 0
16