Webui Log - H3C S6812 Series Command Reference Manual

undo web idle-timeout
Default
The Web connection idle-timeout timer is 10 minutes.
Views
System view
Predefined user roles
network-admin
Parameters
idle-time: Specifies the Web connection idle-timeout timer in minutes. The value range is 1 to 999.
Usage guidelines
The system automatically terminates a Web user connection if no mouse or keyboard operation
occurs within the idle-timeout interval.
This command takes effect immediately for current Web connections.
Examples
# Set the Web connection idle-timeout timer to 100 minutes.
<Sysname> system-view
[Sysname] web idle-timeout 100

webui log

Use webui log enable to enable Web operation logging.
Use undo webui log enable to disable Web operation logging.
Syntax
webui log enable
undo webui log enable
Default
Web operation logging is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
When Web operation logging is enabled, the device generates log messages for important Web
operations, for example, system time change. The device outputs log messages as indicated by
information center settings.
Web operations that can trigger Web operation logging depend on the device model.
A Web operation log message includes the following information:
•
Module name WEB.
•
Mnemonic prefix WEBOPT_.
•
Web client IP address.
•
Web user's username.
51