Restful Https Enable; Screen-Length - H3C S6812 Series Command Reference Manual

Usage guidelines
This command is not supported in FIPS mode.
For users to access the device through the HTTP-based RESTful API, you must enable RESTful
access over HTTP.
Examples
# Enable RESTful access over HTTP.
<Sysname> system-view
[Sysname] restful http enable

restful https enable

Use restful https enable to enable RESTful access over HTTPS.
Use undo restful https enable to disable RESTful access over HTTPS.
Syntax
restful https enable
undo restful https enable
Default
RESTful access over HTTPS is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
For users to access the device through the HTTPS-based RESTful API, you must enable RESTful
access over HTTPS.
Examples
# Enable RESTful access over HTTPS.
<Sysname> system-view
[Sysname] restful https enable

screen-length

Use screen-length to set the maximum number of lines of command output to send to the terminal
at a time when the screen pausing feature is enabled.
Use undo screen-length to restore the default.
Syntax
screen-length screen-length
undo screen-length
Default
A maximum of 24 lines are sent.
Views
User line view
34