Display Stp Root - H3C S6812 Series Command Reference Manual

Examples
# In MSTP mode, display effective MST region configuration.
<Sysname> display stp region-configuration
Oper Configuration
Format selector
Region name
Revision level
Configuration digest : 0x5f762d9a46311effb7a488a3267fca9f
Instance
0
1
2
Table 8 Command output
Field
Format selector
Region name
Revision level
VLANs Mapped
Related commands
instance
region-name
revision-level
vlan-mapping modulo

display stp root

Use display stp root to display the root bridge information of spanning trees.
Syntax
display stp root
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# In MSTP mode, display the root bridge information of all spanning trees.
<Sysname> display stp root
MST ID Root Bridge ID
0 0.00e0-fc0e-6554
: 0
: hello
: 0
VLANs Mapped
21 to 4094
1 to 10
11 to 20
Description
Format selector that is defined by the spanning tree protocol. The default
value is 0, and the selector cannot be configured.
MST region name.
Revision level of the MST region. The default value is 0, and the level can be
configured by using the revision-level command.
VLANs mapped to the MSTI.
ExtPathCost IntPathCost Root Port
200200 0 Ten-GigabitEthernet1/0/1
16