Link-Aggregation Selected-Port Maximum - H3C S6812 Series Command Reference Manual

Use undo link-aggregation port-priority to restore the default.
Syntax
link-aggregation port-priority priority
undo link-aggregation port-priority
Default
The port priority of an interface is 32768.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
priority: Specifies the port priority in the range of 0 to 65535. The smaller the value, the higher the
port priority.
Examples
# Set the port priority to 64 for Layer 2 Ethernet interface Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] link-aggregation port-priority 64
Related commands
lacp system-priority

link-aggregation selected-port maximum

Use link-aggregation selected-port maximum to set the maximum number of Selected ports
allowed in an aggregation group.
Use undo link-aggregation selected-port maximum to restore the default.
Syntax
link-aggregation selected-port maximum max-number
undo link-aggregation selected-port maximum
Default
The maximum number of Selected ports allowed in an aggregation group is 8.
Views
Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
max-number: Specifies the maximum number of Selected ports allowed in an aggregation group.
The value range for this argument is 1 to 8.
Usage guidelines
Executing this command might cause some of the Selected ports in an aggregation group to become
Unselected ports.
22