H3C S6812 Series Command Reference Manual page 592

Number of sent optional TLV
Number of received unknown TLV : 5
LLDP agent nearest-nontpmr:
Port status of LLDP
Admin status
Trap flag
Polling interval
Number of LLDP neighbors
Number of MED neighbors
Number of CDP neighbors
Number of sent optional TLV
Number of received unknown TLV : 5
LLDP agent nearest-customer:
Port status of LLDP
Admin status
Trap flag
Polling interval
Number of LLDP neighbors
Number of MED neighbors
Number of CDP neighbors
Number of sent optional TLV
Number of received unknown TLV : 5
Table 4 Command output
Field
Bridge mode of LLDP
Global status of LLDP
LLDP neighbor information last
changed time
Transmit interval
Hold multiplier
Reinit delay
Transmit max credit
Trap interval
Fast start times
Port 1
Port status of LLDP
Admin status
Trap Flag
: 12
: Enable
: TX_RX
: No
: 0s
: 5
: 2
: 0
: 12
: Enable
: TX_RX
: No
: 0s
: 5
: 2
: 0
: 12
Description
LLDP bridge mode: service-bridge or customer-bridge.
Indicates whether LLDP is globally enabled.
Time when the neighbor information was last updated.
LLDP frame transmission interval.
TTL multiplier.
LLDP reinitialization delay.
Token bucket size for sending LLDP frames.
Trap transmission interval.
Number of LLDP frames sent each time fast LLDP frame transmission
is triggered.
LLDP status of port 1.
Indicates whether LLDP is enabled on the port.
LLDP operating mode of the port:
•
TX_RX—The port can send and receive LLDP frames.
•
Rx_Only—The port can only receive LLDP frames.
•
Tx_Only—The port can only send LLDP frames.
•
Disable—The port cannot send or receive LLDP frames.
Indicates whether trapping is enabled.
17