Voice-Vlan Qos Trust - H3C S6812 Series Command Reference Manual

Syntax
voice-vlan qos cos-value dscp-value
undo voice-vlan qos
Default
A port modifies the CoS and DSCP values for incoming voice VLAN packets to 6 and 46,
respectively.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
cos-value: Specifies a CoS value in the range of 0 to 7. A bigger CoS value represents a higher
priority.
dscp-value: Specifies a DSCP value in the range of 0 to 63. A bigger DSCP value represents a higher
priority.
Usage guidelines
You cannot execute this command on a voice VLAN-enabled port. Before you execute this command
on a port, you must disable the voice VLAN feature on it.
If you execute both the voice-vlan qos and voice-vlan qos trust commands multiple times, the
most recent configuration takes effect.
Examples
# Configure Ten-GigabitEthernet 1/0/1 to modify the CoS and DSCP values for voice VLAN packets
to 5 and 45, respectively.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] voice-vlan qos 5 45
Related commands

voice-vlan qos trust

voice-vlan qos trust
Use voice-vlan qos trust to configure a port to trust the priority settings in incoming voice VLAN
packets.
Use undo voice-vlan qos to restore the default.
Syntax
voice-vlan qos trust
undo voice-vlan qos
Default
A port modifies the CoS and DSCP values for incoming voice VLAN packets to 6 and 46,
respectively.
Views
Layer 2 Ethernet interface view
62