H3C S6812 Series Command Reference Manual page 333

Hide thumbs Also See for S6812 Series:
Table of Contents

Advertisement

Field
Protocol
Primary IP
Description
Brief information of interfaces in
bridge mode:
Type: A - access; T - trunk; H –
hybrid
Speed
Duplex
Type
PVID
Description
Data link layer protocol state of the interface:
UP—The data link layer protocol of the interface is up.
DOWN—The data link layer protocol of the interface is down.
UP(s)—The data link layer protocol of the interface is up, but the
link is an on-demand link or does not exist. The (s) attribute
represents the spoofing flag. This value is typical of null interfaces
and loopback interfaces.
Primary IP address of the interface. This field displays two hyphens (--)
if the interface does not have an IP address.
Description of the interface.
Brief information about Layer 2 interfaces.
Link type options for interfaces.
Speed of the interface, in bps.
This field displays the (a) flag next to the speed if the speed is
automatically negotiated.
This field displays auto if the interface is configured to autonegotiate
its speed but the autonegotiation has not started.
Duplex mode of the interface:
A—Autonegotiation. The interface is configured to autonegotiate
its duplex mode but the autonegotiation has not started.
F—Full duplex.
F(a)—Autonegotiated full duplex.
H—Half duplex.
H(a)—Autonegotiated half duplex.
Link type of the interface:
A—Access.
H—Hybrid.
T—Trunk.
Port VLAN ID.
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

S6813 seriesS5150-ei

Table of Contents