Lldp Hold-Multiplier; Lldp Ignore-Pvid-Inconsistency - H3C S6812 Series Command Reference Manual

<Sysname> system-view
[Sysname] undo lldp global enable
Related commands
lldp enable

lldp hold-multiplier

Use lldp hold-multiplier to set the TTL multiplier.
Use undo lldp hold-multiplier to restore the default.
Syntax
lldp hold-multiplier value
undo lldp hold-multiplier
Default
The TTL multiplier is 4.
Views
System view
Predefined user roles
network-admin
Parameters
value: Sets the TTL multiplier in the range of 2 to 10.
Usage guidelines
The TTL TLV carried in an LLDPDU determines how long the device information carried in the
LLDPDU can be saved on a recipient device.
By setting the TTL multiplier, you can set the TTL of locally sent LLDP frames. The TTL is expressed
by using the following formula:
TTL = Min (65535, (TTL multiplier × LLDP frame transmission interval + 1))
As the expression shows, the TTL can be up to 65535 seconds.
Examples
# Set the TTL multiplier to 6.
<Sysname> system-view
[Sysname] lldp hold-multiplier 6
Related commands
lldp timer tx-interval

lldp ignore-pvid-inconsistency

Use lldp ignore-pvid-inconsistency to disable LLDP PVID inconsistency check.
Use undo lldp ignore-pvid-inconsistency to enable LLDP PVID inconsistency check.
Syntax
lldp ignore-pvid-inconsistency
undo lldp ignore-pvid-inconsistency
27