H3C S6812 Series Command Reference Manual page 514

Examples
# Associate Ten-GigabitEthernet 1/0/1 with IP subnet-based VLAN 3.
<Sysname> system-view
[Sysname] vlan 3
[Sysname-vlan3] ip-subnet-vlan ip 192.168.1.0 255.255.255.0
[Sysname-vlan3] quit
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] port link-type hybrid
[Sysname-Ten-GigabitEthernet1/0/1] port hybrid vlan 3 untagged
[Sysname-Ten-GigabitEthernet1/0/1] port hybrid ip-subnet-vlan vlan 3
# Associate Layer 2 aggregate interface Bridge-Aggregation 1 with IP subnet-based VLAN 3.
<Sysname> system-view
[Sysname] vlan 3
[Sysname-vlan3] ip-subnet-vlan ip 192.168.1.0 255.255.255.0
[Sysname-vlan3] quit
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] port link-type hybrid
[Sysname-Bridge-Aggregation1] port hybrid vlan 3 untagged
[Sysname-Bridge-Aggregation1] port hybrid ip-subnet-vlan vlan 3
Related commands
display ip-subnet-vlan interface
display ip-subnet-vlan vlan
ip-subnet-vlan
Protocol-based VLAN commands
display protocol-vlan interface
Use display protocol-vlan interface to display protocol-based VLANs that are associated with the
specified ports.
Syntax
display protocol-vlan interface { interface-type interface-number1 [ to interface-type
interface-number2 ] | all }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number1 to interface-type interface-number2: Specifies an interface range.
Both the interface-type interface-number1 argument and the interface-type interface-number2
argument represent the interface type and interface number. The value for the interface-number2
argument must be greater than or equal to the value for the interface-number1 argument.
all: Specifies all ports.
27