Free User-Interface - H3C S6812 Series Command Reference Manual

Views
User view
Predefined user roles
network-admin
Parameters
number1: Specifies the absolute number of a user line. The value range is 0 to 73.
aux: Specifies the AUX line.
vty: Specifies the VTY line.
number2: Specifies the relative number of a user line. The value range is 0 to 9 for AUX lines and 0 to
63 for VTY lines.
Usage guidelines
This command does not release the line you are using.
Examples
# Release VTY line 1.
<Sysname> free line vty 1
Are you sure to free line vty1? [Y/N]:y
[OK]

free user-interface

Use free user-interface to release a user line.
Syntax
free user-interface { number1 | { aux | vty } number2 }
Views
User view
Predefined user roles
network-admin
Parameters
number1: Specifies the absolute number of a user line. The value range is 0 to 73.
aux: Specifies the AUX line.
vty: Specifies the VTY line.
number2: Specifies the relative number of a user line. The value range is 0 to 9 for AUX lines and 0 to
63 for VTY lines.
Usage guidelines
This command does not release the line you are using.
This command is an older version reserved for backward compatibility purposes. It has the same
functionality and output as the free line command. As a best practice, use the free line command.
Examples
# Release VTY line 1.
<Sysname> free user-interface vty 1
Are you sure to free line vty1? [Y/N]:y
[OK]
18