Display Mvrp State - H3C S6812 Series Command Reference Manual

Join Timer
Leave Timer
Periodic Timer
LeaveAll Timer
Registration Type
Registered VLANs :
None
Declared
None
Propagated VLANs :
None
Table 1 Command output
Field
MVRP Global Info
Global Status
Compliance-GVRP
Config Status
Running Status
Registration Type
Registered VLANs
Declared VLANs
Propagated VLANs

display mvrp state

Use display mvrp state to display the MVRP state of a port in a VLAN.
Syntax
display mvrp state interface interface-type interface-number vlan vlan-id
VLANs :
: 20 (centiseconds)
: 60 (centiseconds)
: 100 (centiseconds)
: 1000 (centiseconds)
: Normal
Description
Global MVRP information.
Global MVRP status:
•
Enabled.
•
Disabled.
GVRP compatibility status:
•
True—Compatible.
•
False—Incompatible.
Whether MVRP is enabled on the port:
•
Enabled.
•
Disabled.
Whether MVRP takes effect on the port:
•
Enabled—MVRP takes effect on the port.
•
Disabled—MVRP does not take effect on the port.
Whether MVRP takes effect on a port is determined by the
following items:
•
Global and port-specific MVRP enabling status.
•
Physical link state of the port.
•
Port link type.
•
Whether the port is a member of an aggregation group.
MVRP registration mode:
•
Normal.
•
Fixed.
•
Forbidden.
VLANs that the port has registered.
VLANs that the port has declared to its peer participant.
VLANs that the port has learned and notified other participants on
the same device to declare to their respective peer participants.
2