Syntax; Views; Any View; Predefined User Roles - H3C S6812 Series Command Reference Manual

Examples
# Set the DHCP server response timeout time to 60 seconds for DHCP server switchover in DHCP
address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] dhcp-server timeout 60
Related commands
remote-server algorithm
display dhcp relay check mac-address
Use display dhcp relay check mac-address to display MAC address check entries on the relay
agent.

Syntax

display dhcp relay check mac-address

Views

Any view

Predefined user roles

network-admin
network-operator
Examples
# Display MAC address check entries on the DHCP relay agent.
<Sysname> display dhcp relay check mac-address
Source-MAC
23f3-1122-adf1
23f3-1122-2230
Table 9 Command output
Field
Source MAC
Interface
Aging-time
display dhcp relay client-information
Use display dhcp relay client-information to display relay entries on the relay agent.
Syntax
display dhcp relay client-information [ interface interface-type interface-number | ip ip-address ]
Views
Any view
Predefined user roles
network-admin
Interface
Vlan2
Vlan3
Description
Source MAC address of the attacker.
Interface where the attack comes from.
Aging time of the MAC address check entry, in seconds.
Aging-time
10
30
63