User-Role - H3C S6812 Series Command Reference Manual

DD varies by month. If you do not specify this argument, the execution start date is the first day when
the specified time arrives.
interval interval: Specifies the execution time interval in the hh:mm or mm format. This argument
can have up to six characters. When in the hh:mm format, mm must be in the range of 0 to 59. When
in the mm format, this argument must be equal to or greater than 1 minute.
month-date [ month-day | last ]: Specifies a day in a month, in the range 1 to 31. The last keyword
indicates the last day of a month. If you specify a day that does not exist in a month, the configuration
takes effect on that day in the next month.
week-day week-day&<1-7>: Specifies a space-separated list of up to seven week days for the
schedule. Valid week day values include Mon, Tue, Wed, Thu, Fri, Sat, and Sun.
Usage guidelines
The time repeating [ at time [ date ] ] interval interval command configures the device to execute a
schedule at an interval from the specified time on.
The time repeating at time [ month-date [ month-day | last ] | week-day week-day&<1-7> ]
command configures the device to execute a schedule at the specified time on every specified day in
a month or week.
The time at command, the time once command, and the time repeating command overwrite one
another, whichever is configured most recently takes effect.
Examples
# Configure the device to execute schedule saveconfig once an hour from 8:00 a.m. on.
<Sysname> system-view
[Sysname] scheduler schedule saveconfig
[Sysname-schedule-saveconfig] time repeating at 8:00 interval 60
# Configure the device to execute schedule saveconfig at 12:00 p.m. every day.
<Sysname> system-view
[Sysname] scheduler schedule saveconfig
[Sysname-schedule-saveconfig] time repeating at 12:00
# Configure the device to execute schedule saveconfig at 8:00 a.m. on the 5th of every month.
<Sysname> system-view
[Sysname] scheduler schedule saveconfig
[Sysname-schedule-saveconfig] time repeating at 8:00 month-date 5
# Configure the device to execute schedule saveconfig at 8:00 a.m. on the last day of every month.
<Sysname> system-view
[Sysname] scheduler schedule saveconfig
[Sysname-schedule-saveconfig] time repeating at 8:00 month-date last
# Configure the device to execute schedule saveconfig at 8:00 a.m. every Friday and Saturday.
<Sysname> system-view
[Sysname] scheduler schedule saveconfig
[Sysname-schedule-saveconfig] time repeating at 8:00 week-day fri sat
Related commands
scheduler schedule

user-role

Use user-role to assign user roles to a schedule.
Use undo user-role to remove user roles from a schedule.
44