Lacp System-Priority; Link-Aggregation Global Load-Sharing Mode - H3C S6812 Series Command Reference Manual

undo lacp period
Default
The LACP timeout interval is the long timeout interval (90 seconds) on an interface.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Examples
# Set the short LACP timeout interval (3 seconds) on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] lacp period short

lacp system-priority

Use lacp system-priority to set the system LACP priority.
Use undo lacp system-priority to restore the default.
Syntax
lacp system-priority priority
undo lacp system-priority
Default
The system LACP priority is 32768.
Views
System view
Predefined user roles
network-admin
Parameters
priority: Specifies the system LACP priority in the range of 0 to 65535. The smaller the value, the
higher the system LACP priority.
Examples
# Set the system LACP priority to 64.
<Sysname> system-view
[Sysname] lacp system-priority 64
Related commands
link-aggregation port-priority

link-aggregation global load-sharing mode

Use link-aggregation global load-sharing mode to set the global link-aggregation load sharing
mode.
Use undo link-aggregation global load-sharing mode to restore the default.
16