Bye - H3C S6812 Series Command Reference Manual

Usage guidelines
You can perform this operation only after you log in to the FTP server.
FTP transfers files in either of the following modes:
•
Binary mode—Transfers program file or pictures.
•
ASCII mode—Transfers text files.
When the device acts as the FTP server, the transfer mode is determined by the FTP client. When
the device acts as the FTP client, you can set the transfer mode. The default transfer mode is binary.
Examples
# Set the file transfer mode to binary.
ftp> binary
200 TYPE is now 8-bit binary
Related commands
ascii

bye

Use bye to terminate the connection to the FTP server and return to user view. If no connection is
established between the device and the FTP server, use this command to return to user view.
Syntax
bye
Views
FTP client view
Predefined user roles
network-admin
Examples
# Terminate the connection to the FTP server and return to user view.
ftp> bye
221-Goodbye. You uploaded 2 and downloaded 2 kbytes.
221 Logout.
<Sysname>
Related commands
quit
cd
Use cd to change the current working directory to another directory on the FTP server.
Syntax
cd { directory | .. | / }
Views
FTP client view
Predefined user roles
network-admin
10