H3C S6812 Series Command Reference Manual page 767

[Sysname-Ten-GigabitEthernet1/0/1] dhcp snooping information enable
[Sysname-Ten-GigabitEthernet1/0/1] dhcp snooping information strategy replace
[Sysname-Ten-GigabitEthernet1/0/1] dhcp snooping information circuit-id verbose
node-identifier sysname format ascii
Related commands
dhcp snooping information enable
dhcp snooping information strategy
display dhcp snooping information
dhcp snooping information enable
Use dhcp snooping information enable to enable DHCP snooping to support Option 82.
Use undo dhcp snooping information enable to disable this feature.
Syntax
dhcp snooping information enable
undo dhcp snooping information enable
Default
DHCP snooping does not support Option 82.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
Usage guidelines
This command enables DHCP snooping to add Option 82 into DHCP requests that do not contain
Option 82 before forwarding the requests to the DHCP server. The content of Option 82 is
determined by the dhcp snooping information circuit-id and dhcp snooping information
remote-id commands. If the received DHCP request packets contain Option 82, DHCP snooping
handles the packets according to the strategy configured by the dhcp snooping information
strategy command.
Examples
# Enable DHCP snooping to support Option 82.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] dhcp snooping information enable
Related commands
dhcp snooping information circuit-id
dhcp snooping information remote-id
dhcp snooping information strategy
dhcp snooping information remote-id
Use dhcp snooping information remote-id to configure the padding mode and padding format for
the Remote ID sub-option.
84