Default
LLDP PVID inconsistency check is enabled.
Views
System view
Default command level
network-admin
Usage guidelines
By default, when the system receives an LLDP packet, it compares the PVID value contained in
packet with the PVID configured on the receiving interface. If the two PVIDs do not match, a log
message will be printed to notify the user.
You can disable PVID inconsistency check if different PVIDs are required on a link.
Examples
# Disable LLDP PVID inconsistency check.
<Sysname> system-view
[Sysname] lldp ignore-pvid-inconsistency
lldp management-address-format string
Use lldp management-address-format string to set the encoding format of the management
address to string.
Use undo lldp management-address-format to restore the default.
Syntax
In Layer 2 Ethernet view or management Ethernet interface view:
lldp [ agent { nearest-customer | nearest-nontpmr } ] management-address-format string
undo lldp [ agent { nearest-customer | nearest-nontpmr } ] management-address-format
eIn Layer 2 aggregate interface view:
lldp agent { nearest-customer | nearest-nontpmr } management-address-format string
undo lldp agent { nearest-customer | nearest-nontpmr } management-address-format
Default
The encoding format of the management address is numeric.
Views
Layer 2 Ethernet interface view
Management Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
agent: Specifies an LLDP agent type. If you do not specify an agent type in Ethernet or management
Ethernet interface view, the command sets the encoding format of the management address for
nearest bridge agents.
nearest-customer: Specifies nearest customer bridge agents.
28