H3C S6812 Series Command Reference Manual page 778

Examples
# Display BOOTP client information on VLAN-interface 10.
<Sysname> display bootp client interface vlan-interface 10
Vlan-interface10 BOOTP client information:
Allocated IP: 169.254.0.2 255.255.0.0
Transaction ID: 0x3d8a7431
MAC Address: 00e0-fc0a-c3ef
Table 18 Command output
Field
BOOTP client information
Allocated IP
Transaction ID
Mac Address
Related commands
ip address bootp-alloc
ip address bootp-alloc
Use ip address bootp-alloc to configure an interface to use BOOTP for IP address acquisition.
Use undo ip address bootp-alloc to cancel an interface from using BOOTP.
Syntax
ip address bootp-alloc
undo ip address bootp-alloc
Default
An interface does not use BOOTP for IP address acquisition.
Views
Interface view
Predefined user roles
network-admin
Examples
# Configure VLAN-interface 10 to use BOOTP for IP address acquisition.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] ip address bootp-alloc
Related commands
display bootp client
Description
Information about the interface that acts as a BOOTP client.
BOOTP client's IP address allocated by the BOOTP server.
Value of the XID field in a BOOTP message. The BOOTP client
chooses a random number for the XID field when sending a
BOOTP request to the BOOTP server. It is used to match a
response message from the BOOTP server. If the values of the
XID field are different in the BOOTP response and request, the
BOOTP client drops the BOOTP response.
MAC address of a BOOTP client.
95