Scheduler Job - H3C S6812 Series Command Reference Manual

Usage guidelines
This command is disruptive. Use this command only when you cannot troubleshoot the device by
using other methods, or you want to use the device in a different scenario.
Examples
# Restore the factory-default configuration for the device.
<Sysname> restore factory-default
This command will restore the system to the factory default configuration and clear the
operation data. Continue [Y/N]:y
Restoring the factory default configuration. This process might take a few minutes. Please
wait.................................................................................
.........................Done.
Please reboot the system to place the factory default configuration into effect.
Related commands
reboot

scheduler job

Use scheduler job to create a job and enter its view, or enter the view of an existing job.
Use undo scheduler job to delete a job.
Syntax
scheduler job job-name
undo scheduler job job-name
Default
No job exists.
Views
System view
Predefined user roles
network-admin
Parameters
job-name: Specifies the job name, a case-sensitive string of 1 to 47 characters.
Usage guidelines
A job can be referenced by multiple schedules. In job view, you can assign commands to the job.
Examples
# Create a job named backupconfig and enter job view.
<Sysname> system-view
[Sysname] scheduler job backupconfig
[Sysname-job-backupconfig]
Related commands
command
scheduler schedule
35