Mvrp Global Enable - H3C S6812 Series Command Reference Manual

Syntax
mvrp enable
undo mvrp enable
Default
MVRP is disabled on a port.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
Usage guidelines
For MVRP to take effect on a port, make sure the following requirements are met:
•
MVRP is enabled both globally and on the port.
•
The port is physically up.
•
The port link type is trunk.
•
The port is not a member of an aggregation group.
Examples
# Enable MVRP on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] mvrp global enable
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] port link-type trunk
[Sysname-Ten-GigabitEthernet1/0/1] mvrp enable
Related commands
display mvrp running-status

mvrp global enable

Use mvrp global enable to enable MVRP globally.
Use undo mvrp global enable to disable MVRP globally.
Syntax
mvrp global enable
undo mvrp global enable
Default
MVRP is disabled globally.
Views
System view
Predefined user roles
network-admin
Usage guidelines
For MVRP to take effect on a port, enable MVRP both on the port and globally.
9