H3C S6812 Series Command Reference Manual page 857

time exceed reassembly 0
ratelimited
display ipv6 interface
Use display ipv6 interface to display IPv6 interface information.
Syntax
display ipv6 interface [ interface-type [ interface-number ] ] [ brief ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type: Specifies an interface by its type.
interface-number: Specifies an interface by its number.
brief: Displays brief IPv6 interface information, including physical status, link-layer protocols, and
IPv6 address. If you do not specify the keyword, this command displays detailed IPv6 interface
information, including IPv6 configuration and operating information, and IPv6 packet statistics.
Usage guidelines
If you do not specify an interface, this command displays IPv6 information about all interfaces.
If you specify only the interface-type argument, this command displays IPv6 information about the
interfaces of the specified type.
If you specify both the interface-type and the interface-number arguments, this command displays
IPv6 information about the specified interface.
Examples
# Display IPv6 information about VLAN-interface 2.
<Sysname> display ipv6 interface vlan-interface 2
Vlan-interface2 current state: UP
Line protocol current state: UP
IPv6 is enabled, link-local address is FE80::1234:56FF:FE65:4322 [TENTATIVE]
Global unicast address(es):
10::1234:56FF:FE65:4322, subnet is 10::/64 [TENTATIVE] [AUTOCFG]
[valid lifetime 4641s/preferred lifetime 4637s]
20::1234:56ff:fe65:4322, subnet is 20::/64 [TENTATIVE] [EUI-64]
30::1, subnet is 30::/64 [TENTATIVE] [ANYCAST]
40::2, subnet is 40::/64 [TENTATIVE] [DHCP]
50::3, subnet is 50::/64 [TENTATIVE]
Joined group address(es):
FF02::1
FF02::2
FF02::1:FF00:1
FF02::1:FF65:4322
MTU is 1500 bytes
ND DAD is enabled, number of DAD attempts: 1
redirect
0 other errors
3
0
0