Remove The Access Panel - HPE ProLiant DL380 Gen11 User Manual

Remove the access panel

Remove the access panel
About this task About this task
WARNING: WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives, power supplies, and internal system
components to cool before touching them.
CAUTION: CAUTION:
Do not operate the chassis for long periods with the access panel open or removed. Operating the chassis in this manner
results in improper airflow and improper cooling that can lead to thermal damage.
Procedure Procedure
1. Power down the server.
2. If installed, release the cable management arm .
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Do one of the following:
Extend the server from the rack .
Remove the server from the rack .
5. Open or unlock the locking latch, slide the access panel to the rear of the chassis, and remove the access panel.
HPE ProLiant DL380 Gen11 Server User Guide 41