Results
Results
The installation is complete.
Installing a universal media bay in the LFF chassis
Installing a universal media bay in the LFF chassis
Prerequisites
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
The components included with the hardware option kit
T-10 Torx screwdriver
Procedure
Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Extend the server from the rack .
Remove the server from the rack .
4. Remove the access panel .
5. Remove the air baffle or midplane drive cage .
6. Remove the fan cage.
7. Remove the bay blank.
8. Remove the support bracket.
HPE ProLiant DL380 Gen11 Server User Guide
93