HPE ProLiant DL380 Gen11 User Manual page 132

8. Install the tertiary riser cage:
Results Results
The installation is complete.
Installing an accelerator or GPU Installing an accelerator or GPU
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have the following items available:
The components included with the hardware option kit
T-30 Torx screwdriver
T-10 Torx screwdriver
High-performance heatsinks must be installed with this option.
About this task About this task
An accelerator or GPU can be installed into the primary, secondary, or tertiary position. This procedure shows an installation in the
secondary position.
Procedure Procedure
1. Observe the following alert.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all PCIe slots have either CAUTION:
an expansion slot cover or an expansion board installed.
2. Power down the server.
3. Remove all power:
a. Disconnect each power cord from the power source.
HPE ProLiant DL380 Gen11 Server User Guide 132