HPE ProLiant DL380 Gen11 User Manual page 94

9. Route the cables through the opening.
10. Install the universal media bay.
11. Connect the cables.
12. Install the access panel .
13. Slide the server into the rack.
14. Connect each power cord to the server.
15. Connect each power cord to the power source.
16. Power up the server .
Results Results
The installation is complete.
Installing the optical disc drive in the SFF universal media bay Installing the optical disc drive in the SFF universal media bay
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have the following items available:
The components included with the hardware option kit
T-10 Torx screwdriver
Phillips No. 1 screwdriver
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
HPE ProLiant DL380 Gen11 Server User Guide 94