HPE ProLiant DL380 Gen11 User Manual page 48

Remove the riser cage Remove the riser cage
About this task About this task
CAUTION: CAUTION: To prevent damage to the server or expansion boards, power down the server and remove all AC power cords
before removing or installing the PCI riser cage.
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Extend the server from the rack .
Remove the server from the rack .
4. Remove the access panel .
5. Remove the riser cage:
Primary and secondary riser cages
HPE ProLiant DL380 Gen11 Server User Guide 48