Remove The Access Panel - HPE ProLiant DL360 Gen11 User Manual

Server warnings and cautions
About this task About this task
WARNING: To reduce the risk of personal injury or equipment damage, be sure that the rack is adequately stabilized WARNING:
before extending anything from the rack.
Procedure Procedure
1. Power down the server.
2. Release the cable management arm .
3. Disconnect the cabling from the rear panel.
4. Extend the server from the rack .
5. Remove the server from the rack:
6. Place the server on a sturdy, level surface.

Remove the access panel

Remove the access panel
About this task About this task
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components WARNING:
to cool before touching them.
CAUTION: Do not operate the server for long periods with the access panel open or removed. Operating the server in CAUTION:
this manner results in improper airflow and improper cooling that can lead to thermal damage.
Procedure Procedure
1. Power down the server.
2. Extend the server from the rack .
3. Open or unlock the locking latch, slide the access panel to the rear of the chassis, and remove the access panel.
HPE ProLiant DL360 Gen11 Server User Guide 32