HPE ProLiant DL380 Gen11 User Manual page 113

e. Use a T-30 Torx screwdriver to tighten one pair of diagonally opposite heatsink screws (callouts 1 to 2), and then tighten the other
pair of heatsink screws (callouts 3 to 4).
9. Install the air baffle and other removed hardware components.
10. Install the access panel.
11. If the server was removed from an enclosure or a rack, reinstall it now.
12. Connect all peripheral cables to the server.
13. Connect each power cord to the server.
14. Connect each power cord to the power source.
15. Power up the server.
Results Results
The installation is complete.
HPE ProLiant DL380 Gen11 Server User Guide 113