HPE ProLiant DL380 Gen11 User Manual page 77

4. Determine the status of the drive from the drive LED definitions .
5. If removed, install the front bezel .
6. Configure the controller .
Results Results
The installation is complete.
Energy pack options Energy pack options
If there is an unplanned server power outage, the flash-backed write cache (FBWC) feature of HPE storage controllers requires a centralized
backup power source to back up the write cache data in a flash device. This server supports the following power options—collectively
known as energy pack:
HPE Smart Storage Battery
HPE Smart Storage Hybrid Capacitor
One energy pack supports multiple devices. After it is installed, the status of the energy pack appears in HPE iLO. For more information, see
the iLO user guide:
https://www.hpe.com/support/ilo6 https://www.hpe.com/support/ilo6
Subtopics Subtopics
Minimum firmware versions Minimum firmware versions
HPE Smart Storage Battery HPE Smart Storage Battery
HPE Smart Storage Hybrid Capacitor HPE Smart Storage Hybrid Capacitor
Installing a smart storage battery/capacitor Installing a smart storage battery/capacitor
Minimum firmware versions Minimum firmware versions
Product Product
Server system ROM
HPE MR type-o and type-p Gen11 controllers 52.22.3-4650
HPE SR900 series type-p Gen11 controllers
Minimum firmware version Minimum firmware version
1.20
03.01.14.062
HPE ProLiant DL380 Gen11 Server User Guide 77