HPE ProLiant DL380 Gen11 User Manual page 96

9. Cable the optical disc drive .
10. Install the fan cage.
11. Install the air baffle or midplane drive cage.
12. Install the access panel .
13. Slide the server into the rack.
14. Connect each power cord to the server.
15. Connect each power cord to the power source.
16. Power up the server .
Results Results
The installation is complete.
Installing the optical disc drive in the LFF universal media bay Installing the optical disc drive in the LFF universal media bay
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have the following items available:
The components included with the hardware option kit
T-10 Torx screwdriver
Phillips No. 1 screwdriver
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Extend the server from the rack .
Remove the server from the rack .
4. Remove the access panel .
5. Remove the air baffle or midplane drive cage .
6. Remove the fan cage.
7. Remove the optical drive blank from the universal media bay.
Retain the blank for future use.
HPE ProLiant DL380 Gen11 Server User Guide 96