HPE ProLiant DL380 Gen11 User Manual page 84

DIMM-processor compatibility DIMM-processor compatibility
Fourth-generation Intel Xeon Scalable processors support DDR5-4800 DIMMs.
Do not mix DIMMs. Install only the supported DDR5-4800 DIMMs in the server.
HPE SmartMemory speed information HPE SmartMemory speed information
For more information about memory speed information, see the Hewlett Packard Enterprise website (https://www.hpe.com/docs/memory-
speed-table).
Installing a DIMM Installing a DIMM
Prerequisites Prerequisites
Before installing this option, be sure you have the following:
The components included with the hardware option kit
For more information on specific options, see the server QuickSpecs on the Hewlett Packard Enterprise
About this task About this task
The server supports up to 32 DIMMs.
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
a. Extend the server from the rack .
b. Remove the server from the rack .
4. Remove the access panel .
5. Remove the air baffle .
6. Open the DIMM slot latches.
Hewlett Packard Enterprise website website.
HPE ProLiant DL380 Gen11 Server User Guide 84