HPE ProLiant DL380 Gen11 User Manual page 81

8. Route the SID cable through the opening in the front of the server, and then install the SID module. Secure the module using the T-10
screw.
9. Connect the SID module cable to the SID module connector .
CAUTION: When routing cables, make sure that the cables are not in a position where they can be pinched or crimped. CAUTION:
10. Install the fan cage.
11. Do one of the following:
Install the air baffle .
Install the midplane drive cage .
HPE ProLiant DL380 Gen11 Server User Guide 81