Table of Contents
Advertisement
Stratasys J850/J835 User Guide
22. Close the printer cover.
23. Confirm the actions in the wizard screen (see step 15) and click Next.
24. When done, click Next.
25. Select the action that you wish to perform:
DOC-18001 Rev. N
Figure 4-20 Stretching the fabric on the non-elevated tray (sample)
Note: If you are placing fabric on a double-sided adhesive tape, use a
rubber hand roller, if necessary.
The tray moves to the Home position.
Figure 4-21 Moving axes
Figure 4-22 Select action to repeat or confirm fabric placement
❒ To adjust the fabric placement, select Repeat fabric placement, click
Next, and continue with step 12.
❒ To complete the wizard, select Confirm fabric placement and save
new parameters and click Next.
4 Operating and Maintaining the Printer
4-15
Advertisement
Table of Contents
