Stratasys J850/J835 User Guide
Revision
Rev. M
Rev. N
DOC-18001 Rev. N
Release Date
Description
December 2022
• Preparing the Build Tray for Printing on
• Removing Fabric from the Elevated Build
• Replacing the UV Lamps was updated.
• Replacing the Material Filters was updated.
• Replacing the Waste Container was
• Copyright was updated to include
• Improving Color Uniformity of X-Walls was
• Patents was updated to include the UKCA
• Other minor corrections.
December 2022
Minor changes
Fabric was updated to correct the Fire
Hazard warning and the micron to mm
conversion.
Tray was updated.
updated.
information in the FCC Compliance section.
updated.
mark.
1 About This Guide
1-5