Stratasys J850 User Manual page 10

Stratasys J850/J835 User Guide
Revision
Rev. I
Rev. J
Rev. K
Rev. L
DOC-18001 Rev. N
Release Date Description
November 2021 Flushing the Print-Block Heater was updated
with instructions for using the automatic
flushing process.
November 2021 Added the digital anatomy features.
May 2022
• Symbols and Warning Labels was updated
• Preparing the Build Tray for Printing on
• Removing Fabric from the Build Tray
• Shutting Down the Printer was updated
June 2022
• Preparing the Build Tray for Printing on
• Adjusting Build Tray Height (3DFashion
• Preparing the Build Tray for Printing on
• Replacing the Waste-Pump Tubes was
• Using This Guide was updated to provide
• For More Information was removed.
• Additional Resources was renamed to
with a Crushing Hazard label.
Fabric (TechStyle Printers) was added.
(TechStyle Printers) was added.
with the number of cleaning-fluid cartridges
needed when shutting down the printer for
more than 30 days.
Fabric was updated to include the different
tray types.
Printers) was removed.
Fabric (3DFashion Printers) was removed.
updated to remove the clamp from the tube
that is directed to the waste container.
information about how to get the latest
revision of the document and how to send
feedback.
Stratasys Online Resources and updated to
include information about the Online
Stratasys Academy including the Stratasys
Academy YouTube Channel.
1 About This Guide
1-4