Table of Contents
Advertisement
Stratasys J850/J835 User Guide
Printer Interface Color Key
The background colors in the printer indicator fields tell you at a glance
whether or not the value or item is suitable or ready for printing.
• Green—suitable/ready for printing
• Blue—not ready
• Red—not suitable for printing (or indicates a warning)
The color of the material cartridges displayed in the printer interface indicates
which cartridges are active for the current (or next) print job.
For example, in Figure 4-3 on page 4-4:
• Blue—active cartridge
• Gray—reserve cartridge
DOC-18001 Rev. N
For example, in Figure 4-4 on page 4-7:
❒ Heads (°C)—The heads have reached the temperature required for
printing.
❒ Ambient—The ambient temperature of the printing chamber is within
the acceptable range.
❒ Heads Liquid—The level of model and support material in the
print-block reservoir is OK.
❒ Heads Vacuum—The vacuum level in the system is within the
acceptable range.
❒ Pre-Heater—The model and support resins have been heated to the
required temperature before being supplied to the print block.
For example, in Figure 4-4 on page 4-7:
❒ UV lamps—The UV lamps are not on.
For example, in Figure 4-4 on page 4-7:
❒ Waste—The weight of the waste container is 9000 grams, more than
allowed when beginning a print job. (See "Replacing the Waste
Container" on page 4-142.)
4 Operating and Maintaining the Printer
4-19
Advertisement
Table of Contents
