Table of Contents
Advertisement
Stratasys J850/J835 User Guide
15. After confirming all of the items listed in the wizard screen, click Next.
16. Open the printer. Carefully remove the resin container from the scale and
Caution: The resin in the container is uncured
l
l
17. Close the printer cover, confirm the items listed in the wizard screen, and
18. When the following screen appears, open the printer and remove the scale.
19. Confirm the items listed in the wizard screen, and click Next.
DOC-18001 Rev. N
Printing material (resin) is jetted from each head and its weight is
automatically recorded. Then, the following screen appears.
Figure 4-108 Emptying the resin container
empty it into the purge unit. Then return the container to the scale.
To prevent contact with skin, wear neoprene or nitrile gloves.
Dispose of uncured resin in accordance with applicable regulations. By
emptying the container into the purge unit, the resin is stored in the printer's
sealed waste container.
click Next.
The printer cures the resin in the container.
Figure 4-109 Remove Scale confirmation screen
4 Operating and Maintaining the Printer
4-74
Advertisement
Table of Contents
