Stratasys J850 User Manual page 82

Stratasys J850/J835 User Guide
4. When the following screen appears, open the printer.
Warning: Hot Surface
The print head orifice plates (bottom surface) may be hot. Do not touch
them with your bare hands, and proceed with caution.
5. Place the mirror on the build tray.
6. Put on the gloves.
Caution
Uncured printing material on the print heads might cause skin irritation. Use
disposable cleaning gloves to protect your hands.
7. Soak the cleaning cloth with alcohol.
DOC-18001 Rev. N
Figure 4-69 Wizard screen during cleaning tasks
4 Operating and Maintaining the Printer
4-51