Stratasys J850/J835 User Guide
12. Verify the build tray is clean and close the cover. Confirm this in the wizard
13. When done, click Next.
14. Open the cover.
15. When the following screen appears, secure the fabric as described in steps
DOC-18001 Rev. N
screen and click Next.
Important: Do not remove the carpet and double-sided adhesive tape.
Figure 4-12 Enter thickness parameters to prepare for printing
The tray moves upwards for fabric placement.
Figure 4-13 Moving Axes
16–22.
Figure 4-14 Securing the fabric
4 Operating and Maintaining the Printer
4-12